Welcome to Our Community

Some features disabled for guests. Register Today.

Black Box Cooling Fan

Discussion in 'Controller Boards' started by Timothy Pinto, Mar 5, 2019.

Tags:
  1. Timothy Pinto

    Builder

    Joined:
    Feb 23, 2019
    Messages:
    12
    Likes Received:
    4
    I just put 24v to my 1 day old BlackBox. Red USB LED flashing & BlackBox icon is green. OpenBuild Controls sees its as well. Fan is not running. Is there a thermostat on fan?

    Unrelated, but build assembly was easy and straightforward. Probably 30-45min, unless you drop & lose an M3x6.
     
  2. Timothy Pinto

    Builder

    Joined:
    Feb 23, 2019
    Messages:
    12
    Likes Received:
    4
    It turns out Power switch must to be for the Muscle board. Brain board appears to be powered from USB. I noticed the power switch was off, even though PC was communicating with the brain board. I turned on the power switch and fan started running.
     
    Peter Van Der Walt and GrayUK like this.
  3. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,754
    Likes Received:
    4,070
    Even with power off, USB stays connected and powering the logic side: helps with testing/programming/power failures, etc as the controller's logic can run without needing a PSU connected. Once power is ON, the onboard switchmode converter provides a more stable 5v to the logic side (usb power can be flaky)

    Fan is a 24v fan, needs PSU connected and power switch in ON position
     
  4. TheCDW

    TheCDW New
    Builder

    Joined:
    Mar 5, 2019
    Messages:
    2
    Likes Received:
    0
    I'm curious, when you shut off the 24v power, does the fan keep running for you at a reduced speed? It's like the fan starts running on 5v. I can stop it with my finger and it won't start again. If I give it a little push it'll start turning again.
     
  5. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,754
    Likes Received:
    4,070
    Slightly different fan than during prototying. V2.4 will have an extra diode. As is doesnt affect anything
     
  6. Timothy Pinto

    Builder

    Joined:
    Feb 23, 2019
    Messages:
    12
    Likes Received:
    4
    At first I did not notice fan was still running off USB power. Its so quiet at 5v, that I assumed it had stopped. The fan on my unit acts the same as you described.
     
  7. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,754
    Likes Received:
    4,070
    All expected. Some fans spin up on the little backfeed current through the buck converter, most dont. Either way, in the next batch theres an extra diode just to avoid confusion
     
  8. Tim Callinan

    Builder

    Joined:
    Aug 31, 2015
    Messages:
    2
    Likes Received:
    0
    Hi All,
    Hope you are all keeping well. Yeah we have a black box here - we powered it up and the fan started smoking. Has anyone else had this trouble? Should i order another fan and test it again?
    Tim IMG_20190424_191654.jpg
     
  9. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Please contact the part store for assistance as this should be a covered issue. You can use either the Contact Us page, email at http://support.openbuilds.com/support/home, or use the messaging function in your OBPS account.

    BTW, how many volts is your power supply?
     
    Peter Van Der Walt likes this.
  10. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,754
    Likes Received:
    4,070
    @Rick 2.0 is correct, reach out to the store and they'll help you out :)
    Just an extra note, 100% sure you had the fan plugged in with correct polarity? (Have seen before where incorrect polarity caused this to happen)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice