Welcome to Our Community

Some features disabled for guests. Register Today.

My Workbee 1010

Discussion in 'CNC Mills/Routers' started by Doug Rowley, Feb 2, 2019.

  1. Doug Rowley

    Builder

    Joined:
    Aug 10, 2017
    Messages:
    4
    Likes Received:
    3
    Doug Rowley published a new build:

    Read more about this build...
     
  2. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    what dust shoe do you have? Hard to see in the pic.
     
  3. Doug Rowley

    Builder

    Joined:
    Aug 10, 2017
    Messages:
    4
    Likes Received:
    3
    I printed the dust shoe designed by Ronn Folk (X carve dust shoe with use with cnc4newbie z axis by ronnfolk). I modified mine by making the shoe one piece rather than cutting it in half. As it shows, I used 20x20 v-slot for the slides. I found it necessary to change my z axis end stop switch location as it interfered with the spindle moving up and down inside of the shoe. I made the left 20x20 longer to mount the switch high. I also used corner bracket to trip the switch. I used a door sweep brush from Menards ( big box store).
    IMG_0631.JPG IMG_0632.JPG
     
    Colin Mccourt likes this.
  4. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice