Welcome to Our Community

Some features disabled for guests. Register Today.

Need help wiring DQ 542 MA drivers to MK3/4 contoller

Discussion in 'Controller Boards' started by pappydan, Sep 15, 2016.

  1. pappydan

    pappydan Well-Known
    Builder

    Joined:
    Jul 29, 2016
    Messages:
    46
    Likes Received:
    26
    I just got a new MK3/4 controller with Dq 542 drivers and I am wondering if there is a straightforward wiring diagram for this combination using Nema 23 high torque motors , All from Open Builds. I am really new to all this and had no problems with wiring the cncv2 pro. Has anyone used this combination? Hate to fry a new board first time out.
     
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Hello @pappydan
    Please have a look over the Mk3/4 user manual - http://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBControllerMk34.pdf
    There is some helpful info there.
    Also if you still have problems wiring it up be sure to ask Andrej on the Planet-CNC support forum and he will be more then happy to show you how to get this controller wired up.
    Planet CNC • Index page
    One thing to keep in mind is to never connect/disconnect any wires when the power to the board is on.
    Hope this helps to get you up and running
     
  3. pappydan

    pappydan Well-Known
    Builder

    Joined:
    Jul 29, 2016
    Messages:
    46
    Likes Received:
    26
    Thanks Mark,
    I think I have the wiring figured out now, I'm new to this. I started off with the C-Beam (great little bundle by the way) and then I started making it bigger and more complicated. Trying to learn Cad/Cam, G CODE and build and modify the machine all at the same time. Just a lot of brain things running around in my head. Sometimes I just get into Information overload. I must have watched your cbeam video 25 times. Video was great by the way.
     
    Mark Carew likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice