Stepper brake wiring

I bought a 24V brake for my Z-axis stepper (datasheet attached for reference). The brake operates as N/C (engaged) without power and engages when it sees 24V. My intent is to use the brake when the stepper is not set in hold mode by the X32, ie. when the controller is off.

Is there a 24V (.5a) source available on the X32 that would accomplish this?



Thanks,
Matt

 

Wouldn’t that require coolant to be on while jogging, homing, probing, etc. with the Z-axis though?

 

Sounds like that’s gonna be the best option, figured I’d run it by the experts first.

Thanks for your input.

Matt