Welcome to Our Community

Some features disabled for guests. Register Today.

Out of Stock Items to Return?

Discussion in 'General Talk' started by chakorules, Jan 8, 2015.

  1. chakorules

    Builder

    Joined:
    Jan 4, 2015
    Messages:
    8
    Likes Received:
    0
    How long does it take for out of stock items to return? For example:

    Eccentric Spacers 1/4" ?
     
  2. ChadRat6458

    Builder

    Joined:
    Dec 10, 2014
    Messages:
    93
    Likes Received:
    24
  3. brbubba

    brbubba New
    Builder

    Joined:
    Dec 2, 2014
    Messages:
    22
    Likes Received:
    5
    As Chad pointed out, you can usually find alternative suppliers for those type of items. My bigger concern at this point is extrusions. They are having a very hard time keeping the 500mm lengths in stock in any size.
     
  4. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,854
    Likes Received:
    1,525
    brbubba, the 500mm lengths were a recent addition to the parts store and apparently they grossly underestimated their popularity. You can be assured they won't make the same mistake with the next mill run.
     
    Mark Carew and brbubba like this.
  5. chakorules

    Builder

    Joined:
    Jan 4, 2015
    Messages:
    8
    Likes Received:
    0
    Thanks guys for all the pointers to other suppliers. Just to report

    http://www.smw3d.com/

    Only has QTY (2) in stock. I need more than that so I probably will look else where. (Keep looking)
     
  6. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
    If you find a stock of them, please let me know. They are one of the few remaining items I need.
     
  7. Steve B

    Steve B Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    47
    Likes Received:
    47
  8. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
  9. chakorules

    Builder

    Joined:
    Jan 4, 2015
    Messages:
    8
    Likes Received:
    0
    their website doesn't not disclose if these are the 1/4" spacer either....

    Openbuild put STOCK back up, but when I try to order them you are only allowed QTY (2)....
     
  10. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
  11. chakorules

    Builder

    Joined:
    Jan 4, 2015
    Messages:
    8
    Likes Received:
    0
    Confirmed by Colin, they have 1/4" by the thousands instock!!!

    I'm not 100% sure what they are measuring, but when I measure the spacer (Not including the part that sits inside the wood or metal part) it measures 6.4-6.45mm which is right about .250" (1/4")
    I have a few thousand in stock so I should have plenty.
     
  12. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
    OK, the next hard to find item is the GT3 Pulley. Any leads?
     
  13. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,854
    Likes Received:
    1,525
    Ratrig and CNC Kits claim to have the standard openbuilds 20 tooth model in stock. SPD-SI also has a 20 tooth model but not sure if it is the same.
     
    GrayUK likes this.
  14. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,854
    Likes Received:
    1,525
  15. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
    Rick, thanks for the links. Those off shore stores are expensive. and when they are not, the shipping is more than the parts.

    -nick
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice