Welcome to Our Community

Some features disabled for guests. Register Today.

12mm acme lead screw

Discussion in 'CNC Mills/Routers' started by boskap, May 19, 2016.

  1. boskap

    boskap New
    Builder

    Joined:
    Jun 23, 2015
    Messages:
    49
    Likes Received:
    3
    hi
    Sorry my english is not so good

    my question is it possible to use a 12mm acme lead screw in c-beam
    because the 8mm 1m long are very soft i think
    one of mine already bent a bit

    thx for support
     
  2. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    It is possible, but you'll have to make custom end mount
     
  3. boskap

    boskap New
    Builder

    Joined:
    Jun 23, 2015
    Messages:
    49
    Likes Received:
    3
    Ok thx
    must i use acme or can i use ballscrew too
    what ist the advantage of acme
     
  4. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Lower cost.

    The main issue is verifying that you can mount the lead nut to the plate and have the mounted assembly fit into the limited amount of space inside the track. You will need to custom machine some of the parts to achieve this. DumpsterCNC is a good source of information on the potential size of the fittings.
     
  5. boskap

    boskap New
    Builder

    Joined:
    Jun 23, 2015
    Messages:
    49
    Likes Received:
    3
    Ok thx
    I think the 250mm and 500mm 8mm acme is good
    But the 8mm x 1000mm acme is to soft
    So I want to check the 12mm
     
  6. hary

    hary New
    Builder

    Joined:
    Jul 13, 2017
    Messages:
    5
    Likes Received:
    0
    Hi.

    Did you find the 12mm x 1000mm Lead Screw ?
    I'm looking for a 4 start one (nut move 8mm per turn) but can't find them at a reasonnable price !
    Very strange they sell 1m long 8mm screw witch is very soft, but hardly sell 1m long 12mm !

    Any advice or seller on Ebay or bangood ?
     
  7. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
    Are you using the 1000mm TR-8's in tension? i see many people do them in compression when tension is much better.
    It is a matter of using the collar on the outer end instead of inner ends, but you might not have length to do so.
     
    Dani Rose likes this.
  8. hary

    hary New
    Builder

    Joined:
    Jul 13, 2017
    Messages:
    5
    Likes Received:
    0
    I need tension but also compression (actually the compression is more than the tension).

    I have no way to do something else. I have a lot of compression when the screw is driven at on end and the nut at the other end, 1m far away ! So of course it tends to do something like this : (I don't know how it's called in english, maybe buckle, flambage in french)
    [​IMG]
     
  9. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
    what I am referring to is where are your collars on the rods? are they on the inside of the bearings blocks (always the rod is acting in compression) or the outside (always in tension)
     
  10. hary

    hary New
    Builder

    Joined:
    Jul 13, 2017
    Messages:
    5
    Likes Received:
    0
    You might think I'm using the screw as normal use for 3D printer but I'm not.

    I'm using it to open and close a window, so I'm using it as to make a cylinder
    [​IMG]
     
  11. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
    Ok! yes you need a bigger screw for side and compression load then! I work with some big ones at work :)
    An option would be to use springs to keep the compression off the actuator..
     

    Attached Files:

  12. hary

    hary New
    Builder

    Joined:
    Jul 13, 2017
    Messages:
    5
    Likes Received:
    0
    Yes but the most compression needed is at the end when the distance is the biggest when the spring would be almost free !

    Any idea if it's possible to find some 12mm screw with8mm move per turn ? I found some but with only 2mm move per turn !
     
  13. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
  14. hary

    hary New
    Builder

    Joined:
    Jul 13, 2017
    Messages:
    5
    Likes Received:
    0
    Well, this seller might be the only one I found, but he is in US and doesn't ship to France !
     
  15. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
  16. David Bourne

    Builder

    Joined:
    Aug 11, 2016
    Messages:
    25
    Likes Received:
    36
    12mm is far stronger, I can supply TR12x3 with anti-backlash (POM) nut and mount that fits into standard C-Beam, but will need modified X, Y and Z plates, I can supply those too if needed or you can alter yours, but the plate design is not openbuild so please don't ask for the drawings.

    Send me a private message if interested, oh, I also provide a TR16x4 solution but these will not fit into C-Beam so you need to factor that in, again I do have X,Y and Z plates for this but again they are not openbuild so no drawings.

    Send me a private message if interested.


    Dave.
     
  17. ChadRat6458

    Builder

    Joined:
    Dec 10, 2014
    Messages:
    93
    Likes Received:
    24
    Any back lash nuts that use this lead screw and fit in the C-Beam? Is it possible to cut down the one that came with it?
     
  18. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    You’ll probably need to make your own. The brass ones will have too much play. You’ll probably want something in Delrin that you can make to be anti-backlash. Look up Matthias Wandel’s Making Wood Thread Taps on YouTube.
     
  19. ChadRat6458

    Builder

    Joined:
    Dec 10, 2014
    Messages:
    93
    Likes Received:
    24
  20. Guillaume Rancourt

    Builder

    Joined:
    May 7, 2020
    Messages:
    28
    Likes Received:
    5
    Would you be able to supply the Anti-Backlash nut that attaches to the Gantry Plates on the LEAD machines, that fits a T12x8 ACME lead Screw? (4 start 2mm pitch) ??
     
  21. David Bourne

    Builder

    Joined:
    Aug 11, 2016
    Messages:
    25
    Likes Received:
    36
    I don't have a T12x8 Tap to re-thread the nuts, but if you can source one, that would be the easiest way to fit what you require.
     
  22. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    2,899
    Likes Received:
    1,613
  23. Guillaume Rancourt

    Builder

    Joined:
    May 7, 2020
    Messages:
    28
    Likes Received:
    5
    Yes that is exactly what i'm doing :)

    Thanks
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice