Welcome to Our Community

Some features disabled for guests. Register Today.

Engraving Multi Colour Acrylic

Discussion in 'General Talk' started by GrayUK, Jan 6, 2015.

  1. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Hey Tweakie.
    Was it you who made the Acrylic 2 colour sign, "Apple Bottom Beauty".
    I seem to think it was you. Anyway, either way, a question or two.
    I noticed that the two colours never overlapped. Was this intentional, but more important, if you were working with say, Yellow and Blue, do you think you could have got a Green bleed on an overlap?
    If you had a sign, say, 300mm x 200mm with a Logo at each side, would you be able to light each Logo with a different colour? Or would there be too much horizontal bleed to either side?

    Subject to the previous questions:
    I'm toying with idea of, say, 4 x 3mm Acrylic sheets, each with an engraving. In the base, a holder which will hold 1mm Fibre Optic filaments in a row, beneath each sheet of Acrylic. Each fed with a different coloured LED.

    Would the Fibre Optics be able to transmit enough light, to light the sign, and, would I be able to use LEDs to generate enough light, to light the engravings.
    Providing I make sure the lengths of Fibre Optics are sealed against light bleed, and I use, say, Black tape at the bottom, to separate the light from each sheet, do you think it feasible?

    Cheers
    Gray
     
    Hytech2k likes this.
  2. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Hi Gray,

    Not my video.
    Yes, I think your idea is feasible but like most things a bit of experimentation may be necessary to get it just right. Could be a very stunning effect though.

    Tweakie.
     
  3. Hytech2k

    Hytech2k Veteran
    Builder

    Joined:
    May 6, 2014
    Messages:
    429
    Likes Received:
    331
    Why not just incorporate 2 RGB led strips into the base under each piece of Acrylic? I've seen quite a few business signs made this way. With RGB strips you could light each piece of acrylic whatever color desired.

    Gerald
     
  4. snokid

    snokid Journeyman
    Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    104
    that's pretty cool
     
  5. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    I was thinking of using something like a Christmas tree lights controller, (better rush out and buy a few in the sales!), and say, engraving a part of a waterfall on each sheet, and creating a cascading effect across the sheets, or something similar.
    Or any number of effects, if it works!

    Gray
     
  6. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    That sounds interesting - I would very much like to see the results. :thumbsup:

    Tweakie.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice