Welcome to Our Community

Some features disabled for guests. Register Today.

  • Active Filters:
    t

CoreXY 3D build one

Sep 20, 2019 at 4:18 PM
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Cnc Mill using standard and 3d printed cimponents

Sep 20, 2019 at 2:48 PM
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

The FEEDBACK FRACTAL Build

Sep 20, 2019 at 6:04 AM
Category
Everything Else
Build Progress
Build in Progress...

The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.

"Stung by the Bee" OB Workbee 1010 Build

Sep 20, 2019 at 4:38 AM
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

BlackBox

Sep 15, 2019 at 1:17 PM
Category
Circuit - Software Project
Build Progress
Build Complete!

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

GRANITE 1.0

Dec 25, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.

Modified LEAD machine

Sep 17, 2019 at 12:19 PM
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

Large 'Double H-Bot' using Openbuilds 2040 v-slot

Sep 17, 2019 at 4:45 PM
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.

INDY-TR12 CNC (12mm Diameter Lead Screws)

Jun 7, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

WorkBee CNC Machine

Sep 17, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.

V-Baby CoreXY - Quality Engineered DIY 3d Printer

Sep 16, 2019 at 12:31 PM
Category
H-Bot and Core XY
Build Progress
Build Complete!

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

1510 Workbee Modified

Jan 22, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.

D&R Tiger Paw build combo

Feb 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

Reworked Routkit SD

Jul 28, 2019
Category
Other Style CNC Mills
Build Progress
Build Complete!

I could not "tram" the spindle to the table. I found that the V Rails could not accurately be adjusted so the Gantry was equal distance from the spoilboard in multiple places.

CoreXY - e3d inspired

May 1, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.

DIY CNC Machine

Jun 8, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.

Plywood Built CNC Router

Sep 4, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.

OpenBuilds LEAD CNC

May 22, 2019
Category
CNC ROUTER
Build Progress
Build Complete!

The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!

Workbee CNC Router/Laser/Plotter

Mar 16, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A CNC machine with a massive 30x30" work area, that supports a router, laser, plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.

RigidOko

Sep 3, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

Gantry Style CNC from plywood

Aug 30, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am currently 15 years old, from Germany and trying to build a low budged CNC router. I only designed this CNC based on other CNC routers that I have seen and what I am able of. It consists mostly of 2.3cm plywood to keep costs down. The size of the work area is approx. 40 x 80 cm. I would be really glad if you could give me advice's for improvement on the design and everything else ... ( I could really need your help :) ) enjoy :)

WorkBee CNC build - My honest opinion, tips and help

Sep 14, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.

OpenBuilds OX CNC Machine

Aug 30, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

Minimalist Laser Platform

Aug 18, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.

Custom build 80w Co2 Laser Cutter

Aug 7, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

Dash-X 3D Printer: Innovative design

Jun 3, 2019
Category
Cartesian Style Bots
Build Progress
Build Complete!

Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.

Laser Displacement Golf Ball Scanner

Jul 26, 2019
Category
Turntable 3D Scanner
Build Progress
Build Complete!

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

Openbuilds C-beam

Nov 22, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.

LS-LASER

Oct 3, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

Workhorse 3D Printer

May 26, 2019
Category
Cartesian Style Bots
Build Progress
Build Complete!

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

Beamlazer Laser cutter CO2 100W

Sep 30, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

Frezar - Desktop CNC

Jul 24, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

Plasma cutting table

Sep 3, 2018
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

Cricut Expressions 2 to ESP32 GRBL Control

Nov 18, 2018
Category
Everything Else
Build Progress
Build in Progress...

A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.

LCD Based SLA Resin Printer

May 3, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.

OpenBuilds ACRO System

May 8, 2019
Category
DRAWBOT/ARTBOT
Build Progress
Build Complete!

The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.

(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in

Jan 12, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.

crypt-cube

Jun 25, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.

Simple Cnc System (arduino Grbl)

May 25, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.

UK40OB

Oct 21, 2017
Category
Laser Cutter Builds
Build Progress
Build Complete!

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

South Carolina Workbee 1000X1000

Jun 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

CNC xPRO Driver

Oct 9, 2017
Category
Circuit - Software Project
Build Progress
Build Complete!

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

PrintAir CoreXY

Oct 3, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.

CNC FOR EVERYONE!

May 12, 2014
Category
Other Style CNC Mills
Build Progress
Build Complete!

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

Black out Edition Workbee 1010

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice