Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    on

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

LEAD CNC 1010 (40" x 40")

Nov 24, 2023
Category
CNC ROUTER
Build Progress
Build Complete!

The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!

V-Slot™ Belt & Pinion Example Build

Jun 22, 2018
Category
Everything Else

The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.

OpenBuilds LEAD CNC Machine 1515 (60" x 60")

Sep 6, 2023
Category
CNC ROUTER
Build Progress
Build Complete!

It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.

BlackBox Motion Control System

Nov 1, 2019
Category
Circuit - Software Project
Build Progress
Build Complete!

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

Embroidery machine with XY belt and pinion drive.

Apr 22, 2014
Category
Everything Else
Build Progress
Build in Progress...

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

CNC xPRO Driver

Oct 9, 2017
Category
Circuit - Software Project
Build Progress
Build Complete!

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

myOX : a 4' x 2' OX CNC with potential

Mar 14, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM

V-Slot™ X -Y Stage Hidden Acme Rod Example

Sep 17, 2015
Category
Everything Else

An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Core-XY Cube

Sep 21, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

A simple XY laser engraver/cutter

May 31, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

CNC Router Lathe

Feb 11, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.

Software speed control of a brushless dc (Bldc) motor from Mach3.

Sep 2, 2014
Category
Circuit - Software Project
Build Progress
Build in Progress...

Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.

UltiBots CB3030 CNC Router

Jul 18, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.

OneZ i3

Apr 19, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

TrueUp Glide

Apr 14, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

Sphinx 1050

Dec 4, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.

Proteus

Nov 26, 2013
Category
X/Y Table Style Bots

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

SCoreXY

Jun 9, 2020
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0

UltiFaker 2 Go

Mar 21, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

CubeSpawn Ultimaker 3D Printer Module

Sep 15, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

Plastic Monstrosity

Nov 17, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

CNC FOR EVERYONE!

May 12, 2014
Category
Other Style CNC Mills
Build Progress
Build Complete!

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

Lab Power Supply + Soldering Station

Mar 14, 2018
Category
Everything Else
Build Progress
Build Complete!

A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron

"The Moagie Mill" My C-Beam XLarge

Feb 18, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.

CNC Control Box with VFD etc etc

Jan 6, 2019
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

Cricut Expressions 2 to ESP32 GRBL Control

Nov 18, 2018
Category
Everything Else
Build Progress
Build in Progress...

A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.

OneZ

Jan 7, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

MakerSL MSL-6 DLP 3D Printer

Apr 22, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

Vox Solid State

Mar 15, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).

Tool position setting Part III.

Jan 29, 2014
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

In this, the final part, I would like to introduce Machine Vision and show how it can be used, not only for tool position setting but also for resolving the triangle to calculate the G68 (local system rotated) for jobs which are not squarely placed on the work table.

Nema 23 Belt and Pinion Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

RONIN OX | The G10/Carbon Fiber Hogger

Nov 19, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

PiDuinoCNC Controller

Feb 23, 2016
Category
Circuit - Software Project
Build Progress
Build in Progress...

Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.

Build #2 - Bigger & Stronger

Jan 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9

Tall OX

Jun 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Archer - An extendable all metal 3D printer

Jul 15, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.

Longhorn OX (Under Construction and In Progress)

Mar 30, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice