Select a Category
Build Author Robert E. Nee Views 9040
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author RobSaunders Views 8961
Laser Cutter/Engraver OptLaser 6W with Z-axis
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
Build Author Tim Pierce Views 8525
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Eric Foster Views 5428
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Build Author inhan Views 4059
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author recoush Views 3934
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author Andreas Bockert Views 3822
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author petethepig Views 2854
OpenBuilds ACRO Z Axis
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
Build Author slm222 Views 2328
Cheap linear rail set up for z-axis
A easy to do cheap upgrade for the z axis
Build Author joetemus Views 1984
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Todd Brous Views 922
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.