Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    nt

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

V-Slot® NEMA 17 Linear Actuator (Belt Driven)

Oct 25, 2019
Category
ACTUATOR

Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.

Indie i2

Mar 10, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

BlackBox Motion Control System

Nov 1, 2019
Category
Circuit - Software Project
Build Progress
Build Complete!

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

Embroidery machine with XY belt and pinion drive.

Apr 22, 2014
Category
Everything Else
Build Progress
Build in Progress...

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

WorkBee CNC build - My honest opinion, tips and help

Sep 14, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.

Lautr3k RepRap

Feb 12, 2015
Category
Cartesian Style Bots

A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.

X Y Table OpenRail / V-Slot Build Examples

Sep 28, 2015
Category
Everything Else

The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.

GRANITE 1.0

Dec 25, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.

GridBot Two: Powerfully Simple

Dec 27, 2021
Category
H-Bot and Core XY
Build Progress
Build Complete!

Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Core-XY Cube

Sep 21, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

Triple C-Bot

Aug 14, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

Software speed control of a brushless dc (Bldc) motor from Mach3.

Sep 2, 2014
Category
Circuit - Software Project
Build Progress
Build in Progress...

Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.

Dash-X 3D Printer: Innovative design

Mar 21, 2020
Category
Cartesian Style Bots
Build Progress
Build Complete!

Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.

PhlatPrinter MK 3

Jun 20, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.

C3DO

Dec 6, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

ZideX

Feb 7, 2018
Category
Cartesian Style Bots
Build Progress
Build Complete!

3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.

LCD Based SLA Resin Printer

May 3, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.

3D printed Laser Engraver

May 8, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

RepRap Tuga

Jan 8, 2014
Category
Other Style 3D Printers

This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.

Proteus

Nov 26, 2013
Category
X/Y Table Style Bots

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

Pot Plotter

Jun 16, 2015
Category
Sphere Bots
Build Progress
Build Complete!

My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791

Workhorse 3D Printer

Oct 5, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

Griffin Delta Printer

Mar 9, 2014
Category
Delta Bots
Build Progress
Build Complete!

Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.

The Plastic Beast CoreXY Printer

Feb 28, 2018
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.

Bob's 3D Printer Kit Build

Apr 9, 2014
Category
Cartesian Style Bots
Build Progress
Build Complete!

I have wanted a 3D printer for a while. I had thought to convert my ShapeOko machine to a 3D printer BUT after looking at having to replace the electronics with new and the small form factor. I went looking for a kit which would do what I want. Well I found it. It is the MakerFarm i3v printer.

V-King CoreXY

Dec 12, 2018
Category
H-Bot and Core XY
Build Progress
Build Complete!

V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

Mini-OX

Apr 27, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.

OpenBot

Jun 3, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.

SCoreXY

Jun 9, 2020
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0

3D Printer - Big Size

Feb 14, 2014
Category
3D PRINTER BUILDS

I creat a open source 3D Printer to print big things. Print size: 400x500x300 mm. You can download the Drawing in PDF and in Inventor 2013 format. The unwinding drawings are also included. I take some detail photos for a better understanding.

(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in

Jan 12, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.

CubeSpawn Ultimaker 3D Printer Module

Sep 15, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

Plastic Monstrosity

Nov 17, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

Moag's CNC Mill

May 16, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance

C-Beam Lead Screw CNC Mountain

Aug 28, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

PrintAir CoreXY

Oct 3, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.

Adamantine

Dec 13, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.

Monster Delta

Jan 21, 2014
Category
Delta Bots
Build Progress
Build in Progress...

As a 3rd year mechatronic engineer with a plan to print my 4th year thesis project and with no elegant backup plan, I ran into a problem, I'm gonna need a bigger printer. Loving the DeltaPrintr kickstarter, but needing it before the end of next year I have resolved to make my own.

CNC Control Box with VFD etc etc

Jan 6, 2019
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

MOX CNC

Jan 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103

OneZ

Jan 7, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

V-Baby CoreXY - Quality Engineered DIY 3d Printer

Sep 16, 2019
Category
H-Bot and Core XY
Build Progress
Build Complete!

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

Portable Diode Laser Cutter

Jan 2, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

H-Bot CoreXY Cube with Fixed Build Plate

Apr 21, 2015
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

V-slot and MDF DeltaBot

Aug 31, 2016
Category
Delta Bots
Build Progress
Build Complete!

This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.

MakerSL MSL-6 DLP 3D Printer

Apr 22, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice