Select a Category
Build Author pek Views 18419
Prusa i3 Bear Upgrade V2
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
Build Author pek Views 12525
Prusa i3 Bear Half Upgrade v1.0
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
Build Author Bear Views 8129
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
Build Author Tim Pierce Views 7483
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author SecretSpy711 Views 4908
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author Beam Views 4211
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author TimVukman Views 1971
My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet
Build Author Jones Views 703
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author Jacob Lotter Views 580
1510 Workbee Modified
My thought process and benefits to Installing lineal Rail bearing to my Workbee CNC. As well as raising the Y gantries, Making the CNC mobile, and Hardwired Buttons.
Build Author James Evanko Views 362
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.