Select a Category
Build Author Spark Concepts Views 62654
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author Serge E. Views 52264
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author ymilord Views 42349
FARM OX (Four Axis Rotary Machine)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Build Author Mark Carew Views 40817
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
Build Author dougsnash Views 39681
Rotary Axis OX Derivitive
A Rotary Axis CNC router based on the OX CNC Router
Build Author Rakmup Views 36049
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Build Author Keith Davis Views 31357
A compact, enclosed Core XY design, based on off-the-shelf parts.
Build Author gwandad Views 20429
OX TWO in ONE
What I'm doing is pretty self explanatory. I've put a few pictures up
Build Author Julius Views 19858
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author Jon Norris Views 18818
I'm building a machine specifically for doing 4th axis work on woodwind instruments.
Build Author gwandad Views 17515
C Beam Rotary
I've used the good work of Openbuilds & expanded it to suit.
Build Author zelos Views 15556
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
Build Author Steve hope Views 14979
8x4 CNC build
Routy cnc upgrade.
Build Author cureac Views 14505
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
This is my first major project.
Build Author M^3 Views 14108
M Cubed 3 Axis Bluetooth CNC Controller
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
Build Author john cuervo Views 13636
PROTODERA 5-axis CNC machine
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
Build Author BooTec Views 13473
DIY CNC Machine
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
Build Author Keith Davis Views 11524
A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.
Build Author RobSaunders Views 11242
Laser Cutter/Engraver OptLaser 6W with Z-axis
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
Build Author Robert E. Nee Views 10600
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author Keith Davis Views 10352
A completely belt driven cartesian design with a center mounted X motor. This is a very compact, rugged design.
Build Author Tim Pierce Views 9492
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Laurence Carroll Views 9198
C-Beam Double X
Per the special notes its a variant of the C-Beam, Machine.... I have noticed that alot of people build a CNC router to cut parts for other larger CNC machines.. eg Delta Printers etc....plus this will enable me to cut parts for model RC plans UAV's etc...
Build Author Peter Van Der Walt Views 8941
MiniMill Z Axis Upgrade with Offset Motor
Upgrade your Minimill with an off-set Z Axis Motor
Build Author RobSaunders Views 8576
Z-Axis for Laser Diode
Custom Z Axis for OptLaser 6watt and the Acro System
Build Author Sonny Lowe Views 8468
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
Build Author Zenmaniac Views 8354
4-axis C-Beam Hot Wire Wing cutter
4-axis CNC Hot wire foam wing cutter
Build Author Dave420 Views 7906
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
Build Author Christer Langley Views 7801
My first Build with V-slot
Build Author Joe Garritano Views 7462
Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.
Build Author andrew Adsit Views 6520
OX 1000mm Y Axis Upgrade
Expands y-axis to 1000mm. 1/2 day build.
Build Author greg97233 Views 6285
This is a Dual X-axis platform.
Build Author dreys Views 5973
Was once a mini mill
Build Author Jonathon Duerig Views 5860
CNC Glass Grinder
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
Build Author Eric Foster Views 5709
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Build Author petethepig Views 5704
OpenBuilds ACRO Z Axis
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
Build Author Andreas Bockert Views 5498
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author FRIDGE Views 5340
CNC CARDBOARD BOX CUTTER
Just an easy build .... uncomplicated.... simple tools .... but hoping for a good result!
Build Author HC.Carbo Views 5266
C_Beam X5L Hybrid_Tank
classic router with a ab table
Build Author Jan Turnnherr Views 5134
Ooznest OX CNC for Architecture Modell
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
Build Author recoush Views 5120
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author Colin Tree Views 4955
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.
Build Author BNMaker Views 4868
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Build Author GDanger117 Views 4765
Gantry CNC - Decisions made only to change over and over.
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
Build Author Dave420 Views 4506
Dave's Z axis and powder coated.
I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.
Build Author Jason Kraft Views 4384
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
Build Author inhan Views 4236
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author Joerharris Views 4139
Joe Harris's all metal CNC Router build
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
Build Author dakman Views 4132
Idea for any axis support and Drive
Just an idea right now but will attempt a prototype in the near future. Not sure if this has been tried before or not.....
Build Author Christian James Views 3712
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author Hussein Dermay Views 3634
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Build Author Vunnie Views 3419
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
Build Author Skoobs Views 3417
Pretty Standard + Slave X Axis
Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.
Build Author thehans Views 3368
Voxel OX with Helix Gear Z Transmission (single z motor)
This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.
Build Author TurfnSurf Views 3180
3-Axis Plywood CNC
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
Build Author yoyomokomo Views 3179
Desktop 4-Axis Nema 23
This build is specific to a furniture design I am trying to bring to market. My first attempt to build a machine. I have looked at other build submissions to help me figure out where I would like to start. The workable volume should 36" W x 6" D x 6" T. The goal is to become more comfortable with the electronics side of machines I enjoy using and also lower the cost of my product by reducing man hours in the manufacturing process. Yay!
Build Author MTO Views 2986
4' by 2' Lasercutter
4foot by 2 foot, 10W El-Cheapo blue laser
Build Author Luke Cunningham Views 2945
Tronxy X1 extension
Video on youtube: https://www.youtube.com/watch?v=vCTbLZ2_m-w&t=36s
Build Author joetemus Views 2811
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author 3D Meister Views 2674
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author slm222 Views 2624
Cheap linear rail set up for z-axis
A easy to do cheap upgrade for the z axis
Build Author TimVukman Views 2524
My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet
Build Author KeepOnJeepinOn Views 2363
Minimill bundle, but with an extended X Axis
Build Author Jason Harding Views 2247
Mobile bed cnc machine, first build
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
Build Author Blyn3D Views 2147
Fourth Axis Mill Prototype
I really like the 4th axis I purchased a few years back, but when I went looking for it again the suppliers who once carried it no longer do. Anyone know who makes it? Center hole receives collets. I own a ShopSmith so I am using a 5/8th rod and can mount it's chucks onto this machine. Also I like the use of the skateboard wheels, they are adjustable and one could use more sets over a longer axis. The Sherline z-axis is not my first choice, I just had a spare.
Build Author Neil Rosenberg Views 2113
Rotary Axis for Laser Engraver/Cutter
This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.
Build Author rob4cnc Views 1914
Rock n Roll
The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.
Build Author Michail Views 1824
x_y_module laser engraver
low cost 2 axis cnc laser, really portable and easily expandable
Build Author BOlivier Views 1798
Brice's CNC Router Build
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
Build Author Metalguru Views 1631
YAWBM - Yet another Workbee Modification
Increase Z axis travel by 20-25mm with minimal modifications
Build Author Todd Brous Views 1605
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
Build Author txcomp Views 1578
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
Build Author Weekend-Woodworker Views 1549
Workbee Z-axis Upgrade
Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.
Build Author Kevin S Views 1308
Router for speargun hobby
First router build for speargun fabrication
Build Author romamaker Views 756
Z Axis for ACRO
Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.
Build Author hbtousa Views 579
Stinger-Panting Images in the Air
Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.