Select a Category
Build Author kev20009 Views 3118
MY NEW CNC
This build is not based on the ox, but got my ideas and inspiration from my first build,
Build Author Pendragon Views 8535
A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.
Build Author Cosmosteel Views 1408
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author ChrisViral Views 2611
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Build Author peter28 Views 3030
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
Build Author 3D Meister Views 2483
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Colin Tree Views 4823
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.