Select a Category
Build Author CubeSpawn Views 17411
CubeSpawn Ultimaker 3D Printer Module
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
Build Author Andrew Helsel Views 9798
MiniMill with DW611 and SmoothieBoard 4x v1.1
Build Author Superslinky Views 7704
K40 Laser Build (Major Changes)
Major K40 Laser Mod
Build Author Lasersc Views 2684
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Build Author CubeSpawn Views 13849
CubeSpawn 3 Axis Mill Module
Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.
Build Author Fabio Bertuzz Views 3262
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
Build Author Michael Forte Views 6014
OX CNC Build
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
Build Author J-Wahl Dezign Views 7754
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Build Author Ed Chung Views 5828
Rigidbot Big with glass bed
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Build Author jdeglavina Views 9758
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author Joe F Views 6047
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.