Select a Category
Build Author gjwest Views 26557
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author alex_b Views 9933
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author Rob Taylor Views 19040
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author Rural Views 8550
Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.
Build Author Cuong Vu Views 13529
Camera slider for stacking focus
This is just a small project to get use to the OpenBuild products.
Build Author DaveStewart Views 2903
Small C-Beam Plate Maker With Remote Login & Operation
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
Build Author tonkajeep34 Views 13965
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author Beam Views 4670
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author Craig Hollabaugh Views 702
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Build Author urthlight Views 1029
Ancient Roland Table top Mill
The parts are now very reasonable.
Build Author Doug Rowley Views 1169
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author jz321 Views 1522
OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.
Build Author snokid Views 6052
C-beam Camera slider
feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.
Build Author Tommy Williamson Views 1881
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Build Author cbordeleau Views 3248
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author RJ_Make Views 1173
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author Makerparts Views 977
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
Build Author cbordeleau Views 7306
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author Anthony Castelluci Views 968
Simple Camera Lofted Camera Slider
Build a manual camera slider.