Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    5

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

The Floating Dust Shoe

Feb 15, 2018
Category
Everything Else
Build Progress
Build Complete!

I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

1510 Workbee Modified

Jan 22, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Aluminum Ox

Mar 15, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

Build #2 - Bigger & Stronger

Jan 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9

OpenBuilds LEAD CNC Machine 1515 (60" x 60")

Sep 6, 2023
Category
CNC ROUTER
Build Progress
Build Complete!

It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.

Ox with Gecko Controller and CNC Linux

Dec 26, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

Hot Wire 4 Axis CNC Foam cutter

Nov 14, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now

Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)

Jun 20, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs

SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer

Jan 2, 2017
Category
Everything Else
Build Progress
Build in Progress...

The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.

Rock n Roll

Nov 27, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.

Sphinx 55

Feb 10, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

Lead 1515 tilting table and vertical table accessory

Feb 23, 2024
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.

Modified Sphinx 55 with MGN12 linear rails

Aug 2, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Little Big OX

Jun 5, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.

First 3d build

Dec 16, 2014
Category
Cartesian Style Bots
Build Progress
Build Complete!

I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.

PROTODERA 5-axis CNC machine

Jan 17, 2015
Category
Everything Else
Build Progress
Build in Progress...

We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.

pain in my ox

Mar 21, 2015
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

build is in process the machine went together perfectly no issues at all but the software is another issue I have been trying to get the thing dialed in it is driving me nuts I'm still in the process will update if I ever get it figured out

openbuilds rovo 1000mmx1000mm(rovo x)(korea)

Jun 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.

Pretty Standard + Slave X Axis

Sep 12, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.

RiNo Route

Jan 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

MULIMATERIAL 3D PRINTER (in progress)

May 16, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build

3D printer inspired by the Bukito

Aug 22, 2016
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.

LinearRail - 3D Printer

Jan 10, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

1500mmx500mm Kossel Delta

Feb 3, 2017
Category
Delta Bots
Build Progress
Build in Progress...

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

1500x1000mm Adjustable Height

Jul 9, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

Arizona OpenBuilds MiniMill CNC

Jan 1, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

C-Beam Upgrade to Larger C-Beam

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!

1075 Sphinx

Jul 2, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.

Coined by my family as the: Davomatic

Aug 12, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.

WorkBee 1510 - First CNC Build

Nov 20, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.

Brice's CNC Router Build

Dec 1, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.

Sphinx 1050

Dec 4, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.

ECNCML (budget mashup)

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice