Build List
-
Active Filters:
tr
Build Author Gooshpoo Views 7759
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
Build Author h3rb Views 4215
TEVO Little Monster Direct Mount Extruder
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
Build Author Sword66 Views 8245
The Archon R2
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
Build Author Janis93 Views 13505
1000x1000 Two version of router Belt and Screw
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Generic 6 Axis Controller
Generic 6 Axis (Stepper) Controller
Noob 1000Sphinx
A complete noob stumbling thru his first cnc build in winter.. and trying to find the time with 2 toddlers..
Hybrid shapeoko Xcarve cnc router
My scratch build using shapeoko, xcarve, and custom parts.
Build Author Blyn3D Views 5033
Fourth Axis Mill Prototype
I really like the 4th axis I purchased a few years back, but when I went looking for it again the suppliers who once carried it no longer do. Anyone know who makes it? Center hole receives collets. I own a ShopSmith so I am using a 5/8th rod and can mount it's chucks onto this machine. Also I like the use of the skateboard wheels, they are adjustable and one could use more sets over a longer axis. The Sherline z-axis is not my first choice, I just had a spare.
Build Author Nicademus Views 7869
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
Build Author Bucky Wootmaster Views 2166
Bucky CNC
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Build Author Michael.M Views 8225
Sphinx Evolution
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Build Author BinaryConstruct Views 8861
BinaryConstruct V3
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
Build Author OffAxis Views 6155
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author Calotype Views 2511
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author crnrstndes Views 3018
C-Beam Upgrade to Larger C-Beam
My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!
Build Author Rob Mahan Views 11280
Rob's C-Beam Machine XLarge
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Build Author blterry1 Views 16149
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author cdsmith12 Views 23777
The Plastic Beast CoreXY Printer
In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.
Build Author JAC_101 Views 4730
Small PCB, Engraving and Delrin CNC Mill
This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.
Build Author jz321 Views 3427
OTiS 500mm
OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.
Z-Axis for Laser Diode
Custom Z Axis for OptLaser 6watt and the Acro System
Build Author Rob Withoff Views 3695
Mini-Mill Enhanced
Some enhancements of the basic mini-mill
Build Author Sprags Views 1734
C-Beam Kyo Sphinx 10060
More stuff here.
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Another Kyo inspired Sphinx
A 1000mm x 1000mm copy of Kyo's Sphinx
ACRO 150 X 150 CM
Openbuilds ACRO
Build Author spark2 Views 4244
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
C_Beam Hammerhead 5x
setup for learning 5x
Build Author Naomi Wu Views 8782
Naomi Wu's Automatic Bartender- BarBot!
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
Build Author bpatterson42 Views 2249
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author Denis Lapratte Views 3205
All metal Ox hybrid CNC Router Table
This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.
Build Author Daniel.korneliussen Views 2502
Reprap prusa mendel i2 Frankenstein 2018 build
Mad plumbers choice what Else can i say?
Build Author Camvec Views 5224
WorkBee CNC full kit 1500mm x 1500mm
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
D-Bot Version B
D-Bot with a Replicate controller.
Build Author Eric Jacobsson Views 12719
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author rkugler Views 5218
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Somewhat Simple Lead screw conversion for an OX CNC
Somewhat Simple Lead screw conversion for an OX CNC.
Build Author pek Views 24006
Prusa i3 Bear Half Upgrade v1.0
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
Build Author Dave Pyatt Views 3540
DaveP's Homemade CNC Project
Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...
Build Author stephen cia Views 31918
ZideX
3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.
Build Author Rodrigo Gonzalez Views 2766
Nightfuel
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author Carl Siren Views 6076
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author Bill325 Views 1506
One more life for a cube
Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.
Build Author Carl van Heezik Views 7096
C-Beam™ Machine for PCB milling
C-Beam Machine for PCB milling
Horizontal MiniMill (x5)
The search for an affordable hobby 5 axis machine.
Build Author Chetan PM Views 2929
Composer
Gantry style rigid build
Build Author ShockingTops Views 3393
Opening into doors
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
Build Author Sam Price Views 4759
Acros with customizations [WIP]
This is a work in progress ACROS build with new legs and wire tracks.
Build Author jtaggard Views 31929
Modular DIY CNC Machine
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
Build Author Lindsey Lewis Views 6367
CNC Mini Mill Build
CNC Mini Mill build with some mods after following standard build on Youtube video.
Build Author George Motichka Views 2897
Transformer
I wanted a machine that could easily switch between 3D Printing and Laser Engraving
Build Author CandlerCustoms Views 3745
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
Build Author RJ_Make Views 4359
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author Gerald Klein Views 12923
300mm Diameter, 1 Meter tall, Delta 3d Printer
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
Build Author nc3dpw Views 20059
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Build Author GDanger117 Views 9839
Gantry CNC - Decisions made only to change over and over.
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
Build Author Lindsey Lewis Views 7616
Update Eleksmaker with Openbuild eccentrics for X-Carriage
A simple approach to making the Eleksmaker A3 Laser build have a better functioning X-Carriage! Of course this assumes you bought an Eleksmaker A3 or plan to.
Build Author Apothus Views 20695
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author MidnightQuads Views 3000
MQTitan printer
Components- RAMPS, running marlin, Nema 17, All metal extruder, 600mm lead screws, 600mm 2020 aluminum extrusions, 12v 30a power supply, 12v LED strip, Typical endstops, 600mm 8mm linear rods, Bearing block for 8mm bearings, Openbuilds plates, wheels, and bearings, 500x500mm borosilicate glass plate
Build Author cory stafford Views 3810
Home built laser cutter
This is a laser cutter built with intent to use arduino as controller for a co2 cutting laser.
First build - small scale
Using basic standard components, beams, motors, belt drive on x and y, z is a screw. Using Grbl Panel on Windows 10. Really basic router, had trouble getting the controller to turn on the router and set speeds so it is currently wired to a power bar switch so it runs full speed and I just use the switch to turn it on and off. Just getting x, y and z control working properly for now and likely going to switch the router to my dremel 4000 using a 3d printed mounting bracket I got from thingiverse
Build Author Terone Burgenheim Views 5283
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author Terone Burgenheim Views 1972
My CNC
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Build Author ZacharyB Views 4404
Arizona OpenBuilds MiniMill CNC
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
eTrueUp Glide
A TrueUp Glide modified to use 20x40 V-Slot with a 300x300 bed.
Ancient Roland Table top Mill
The parts are now very reasonable.
Build Author patdee Views 3623
777 CNC Build
To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"
Build Author TimVukman Views 3323
Unique Z
My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet
Plastic Monstrosity
Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.
Screen Mesh Stretching
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
MMXL - A MiniMill Conversion
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
Build Author Anthony Castelluci Views 2435
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Student OneZ
A simplified version of the TrueUp LZ. Designed for classrooms and students
Automatic Sprayer
Automatic spray machine.
Build Author alan richard Views 44799
Core-XY Cube
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author Jason Harding Views 3054
Mobile bed cnc machine, first build
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
Strong? CNC
The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.
Modular Controller PCBs
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
Build Author Scotty Orr Views 9009
QuorXZ: A String-driven, Core XZ Printer
The QuorXZ doesn't magically appear. It's gestation takes time, careful attention, and requires many parts. However, when it is ready, a magical, mechanical instrument is born....(and when you finally say its name, it sounds a little bit like "corks").
c-beam XLarge with ZLarge
XLarge with ZLarge
TrueUp Kit Version
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
Build Author megashub Views 21229
K40 C02 Laser Rail System
An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter
Project There is No Kill Like Overkill
Very stout 2'x4' machine with a deep Z axis
Build Author Fabio Orsi Views 5591
147 RepStrap 002
This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.
Build Author evgeny156 Views 6240
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
Build Author Rick Holder Views 13549
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author mikev Views 7365
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
TrueUp Glide
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
Build Author Limine3D Views 20625
M3Delta
Delta printer designed in sketchup and includes an adjustable bed.
Build Author Peter Van Der Walt Views 5738
The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)
A quick and easy way to make a 3-way mitered corner using Corner Connectors
Build Author 3D Meister Views 3817
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author J-Wahl Dezign Views 8130
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Double trolley X and Z belt training
Total belt drive GT2
Build Author Tom Dirriwachter Views 6271
3DS Cube 3 Modular Extruder
How to modularize the 3D Systems Cube 3 extruder nozzle.
Build Author Dmknerr Views 4062
Server Rack Printer
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
Build Author Lumberjack Engineering Views 17865
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Wifi'not
A simple made hideaway for ugly electronics
Build Author Thair.nl Views 2859
Plate Maker Plus
C-Beam Plate Maker with a larger size of the work area and electronics added.
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.