Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    o

Acro 1010 with 10 watt Laser

Feb 5, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

My C-Beam machine...

Jan 17, 2020
Category
Other Style CNC Mills
Build Progress
Build Complete!

A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.

Plasma CNC machine

Jan 17, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.

Angle grinder converted into electric drill

Jan 13, 2020
Category
Furniture Builds
Build Progress
Build Complete!

How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.

Workbee 1010

Jan 11, 2020
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

Hey all looking forward to sharing this build, I’ve learned a lot reviewing many of these great builds.

1250x1000 Build

Jan 9, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.

Senior Project CNC table

Jan 9, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..

MakerSL MSL-65 Manual Coffee Grinder Stand

Jan 5, 2020
Category
Everything Else
Build Progress
Build in Progress...

I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.

Beamlazer Laser cutter CO2 100W

Jan 4, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

3D printed CNC Machine

Dec 28, 2019
Category
Other Style 3D Printers
Build Progress
Build in Progress...

So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.

Barcelona Build

Dec 18, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.

C3DO

Dec 6, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.

Workbee CNC on steroids

Nov 23, 2019
Category
Other Style CNC Mills
Build Progress
Build in Progress...

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

Frezar - Desktop CNC

Nov 15, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

Fully 3D Printed Small CNC Router/Plotter

Nov 8, 2019
Category
DRAWBOT/ARTBOT BUILDS
Build Progress
Build Complete!

3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!

BlackBox Motion Control System

Nov 1, 2019
Category
Circuit - Software Project
Build Progress
Build Complete!

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

High Z Mod for Lead CNC

Oct 28, 2019
Category
CNC ROUTER
Build Progress
Build Complete!

The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.

Nema 23 Belt and Pinion Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

C-Beam XLarge X/Y Table

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!

V-Slot® NEMA 17 Linear Actuator (Belt Driven)

Oct 25, 2019
Category
ACTUATOR

Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.

C-Beam® Double Wide Gantry Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build actuator is configured to have not only strength, but accuracy! This low profile option offers endless possibilities, and we cant wait to see how this actuator is implemented in your build ideas!

Sim Racing rig

Oct 23, 2019
Category
Everything Else
Build Progress
Build Complete!

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

Rotary Axis for Laser Engraver/Cutter

Oct 9, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

"Stung by the Bee" OB Workbee 1010 Build

Oct 4, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

Modified LEAD machine

Sep 27, 2019
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

Plasma cutting table

Sep 26, 2019
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .

CoreXY 3D build one

Sep 20, 2019
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Cnc Mill using standard and 3d printed cimponents

Sep 20, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

The FEEDBACK FRACTAL Build

Sep 20, 2019
Category
Everything Else
Build Progress
Build in Progress...

The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.

Large 'Double H-Bot' using Openbuilds 2040 v-slot

Sep 17, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.

V-Baby CoreXY - Quality Engineered DIY 3d Printer

Sep 16, 2019
Category
H-Bot and Core XY
Build Progress
Build Complete!

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

RigidOko

Sep 3, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

Reworked Routkit SD

Jul 28, 2019
Category
Other Style CNC Mills
Build Progress
Build Complete!

I could not "tram" the spindle to the table. I found that the V Rails could not accurately be adjusted so the Gantry was equal distance from the spoilboard in multiple places.

Laser Displacement Golf Ball Scanner

Jul 26, 2019
Category
Turntable 3D Scanner
Build Progress
Build Complete!

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

KeePrint Monster

Jun 22, 2019
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

South Carolina Workbee 1000X1000

Jun 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

DIY CNC Machine

Jun 8, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice