Build List
-
Active Filters:
l
6 Axis Motion Control Camera Rig (PAN, TILT, ROLL, SLIDE, FOCUS, ZOOM)
6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.
Build Author Scott Drake Views 13907
1500x1000 CNC Router
1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives
Corexy laser
I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..
Build Author Quentin Karmark Views 5460
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author theracermark Views 2738
Reviving the Origonal PhlatPrinter with BlackBox
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
Build Author wackocrash5150 Views 16940
45W CO2 Laser Build
A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.
Black gear 1500X3000
My cnc update and rebuild.
My Openbuilds Journey
I've learned a lot from building this machine, and had and will continue to enjoy using it. Let The CHIPS FLY!
Some Improvements on the Workbee 1000x1000
Improvements both real and suggested for the Workbee assembly
(Smaug) 100w 1500x1000mm CNC Laser
Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.
Pro Light 1000 CNC Machining Center Rebuild
Replacing the Pro Light control box with a Open Builds BlackBox.
Build Author boutrous Views 7346
Laser Rotary Attachment
Build Summary updated after parts list completed
Build Author Mike Campbell Views 9011
bor 454-D
A large format, modular, rack and pinion build designed around OpenBuilds components.
Build Author Mark Carew Views 1156104
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author ckgottabuild Views 2545
Lead CNC 1010 Platform and Rotating Laptop Mount
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
Build Author Jacob Christiansen Views 5159
ACRO 1010 with custom Z axis
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
Build Author Genetoys Views 2167
Oven Dog
Building a printer that can fit inside and operate at ~200 C oven temperatures
Build Author nickchnv Views 9909
Rigid Compact Desktop C-BEAM
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
V-Slot 2020 EggBot
To build a simple EggBot
Build Author OpenBuilds Views 3299
Interface magnetic mount
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
Build Author RSch Views 3032
Scroll-saw Spiral Cutter
Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!
Build Author CNCGear Views 8371
The BlackBee CNC
Ball screw drive, linear rail CNC Kit
Build Author Indieflow Views 109278
Indie i2
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Filament winder ( carbon fiber )
Carbon fiber filament winder
Build Author C-CNC Views 12179
Gantry Style CNC from plywood
I am currently 15 years old, from Germany and trying to build a low budged CNC router. I only designed this CNC based on other CNC routers that I have seen and what I am able of. It consists mostly of 2.3cm plywood to keep costs down. The size of the work area is approx. 40 x 80 cm. I would be really glad if you could give me advice's for improvement on the design and everything else ... ( I could really need your help :) ) enjoy :)
Build Author Retsaj Views 50928
Standalone Torch Height Controller for CNC Plasma Cutting
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
Laser engraver
CNC laser with GRBL firmware on board
Build Author mathom713 Views 8440
27" by 40" CNC
DIY design and build of a roughing 2' by 3.5' CNC router
1.3m x 1.3m RF laser cutter
RF 100w laser cutter build, aluminium extrusion
Build Author Kyo Views 21916
Sphinx 55
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
Build Author Corey Corbin Views 4866
Ball Screw Carrier.
Create a ball screw carrier with out BF BK bearing blocks.
first CNC build
It start out to be an upgrade of a CNC 3018-PRO but ended up being a full build
DRO
Belt drive linear scale for Mill and Lathe
Build Author M1dn1ghtN1nj4 Views 7833
The Beast
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
K-Cup Sealer
This is a K-Cup sealer i constructed does a fine job
Build Author 2SIsurf Views 4225
Hotwire cnc Surfboards
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
LEAD 1515, HGH15, SFU1604 Ball Screw
Project Completed.
Build Author Sergei Starovoitov Views 3138
Motorized mic stand
This system allows you to adjust the position of the microphone remotely
Build Author Frank Gore Views 7023
Kossel Extreme
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
MOVABLE ART TO SCREEN WALL-MOUNTED TV
This project produced a movable framed canvas to cover a wall-mounted flat-screen TV when not being viewed, which at the touch of of a switch moves down below the TV and sound bar. The same switch is used afterwards to return the artwork up to cover the TV again. Photo shows mechanism without the canvas frame. See other photos.
Rotary axis for Workbee
Adding a rotary axis to the Workbee 1010. Including height modifications to the Workbee.
LR/BS CNC Router
An easy to source/easy to build, yet quite robust CNC router. This design has not yet be implemented.
Another C-Beam machine
This is basically a Sphinx variant with few changes of my own...hope it'll work.
Retractable WorkBee1510 with Marlin+MarlinPanel high level build
WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)
Build Author OpenBuilds Views 22271
INTERFACE CNC Touch Control System
Super cool standalone Human-Machine Interface for controlling your CNC machines!
750x750 Plasma cutter table
It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.
Build Author OpenBuilds Views 8722
Swing Arm
Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way
Build Author OpenBuilds Views 18163
OpenBuilds Table Series
The OpenBuilds Table Series offers a modular table structure that grows with your needs.
Build Author Stokrotka74 Views 5537
Racoon CNC
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
V-rex , Low cost CoreXY
Easy to build,low-cost, CoreXY
CNC Plasma Table 006
Inexpensive plasma table. Accurate, fast, and low maintenance.
ACME OX (A Lead Screw Driven Ox Derivative (850x1500))
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Jose Alezandre Views 1252
Mighty Chihuahua
The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360
Build Author Damian V-SLOT Poland Views 11058
Router Sled V1.1 V-SLOT
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
Build Author Colin Russon Views 2926
TITAN GAMBIT
Anti-Twist Design, larger lead screws, enhanced M8 wheel sets.
YAWBM - Yet another Workbee Modification
Increase Z axis travel by 20-25mm with minimal modifications
Build Author OpenBuilds Views 12188
C-Beam® Tension XL Linear Actuator
Bringing your lead screw precision and accuracy to new lengths using a simplistic tension system!
Horizontal CNC V-Beem v1
V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.
Build Author mytechno3d Views 14519
Cut To Length Machine
A Cut To Length machine controlled by computer
KRE CO2 2x4 Laser
Large Format CO2 Laser Cutter
Build Author Sergio Di Ventura Views 7540
Prusa Dragon LR
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Stabilus 3d Large Format Printer Kit
Stabilus 3d Large Format Printer Kit
Build Author Robert Mech Views 7555
LayerFused X301 - CoreXY Large Volume Printer
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
Build Author Yanou Fishel Views 7999
Beefed up Minimill
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
Build Author Rob Taylor Views 15505
M4: 1510SS Heavy Mk.I
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
Build Author Crazzy French Dude Views 3561
PeeNaPle_V1.4b
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
My build
I am satisfied with my build and next one will be even better.
Build Author Srđan Marković Views 3126
Second machine
Machine with 12,5Nm closed loop steppers or servo steppers
Black Box/ Power supply brackets
This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together
Build Author Wes Dwight Views 5847
Modified Sphinx 55 with MGN12 linear rails
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
Build Author Mark Carew Views 205587
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author Quinnthouzand Views 2624
Mustardo - The Mustard Bot
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
Build Author StrictlyScale Views 6412
Lead1010 Build with Enclosure
First time CNC builder puts together a Lead1010 machine.
Build Author rcKeith Views 5890
USB Hot Wire CNC Foam Cutter
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
Build Author Damian V-SLOT Poland Views 13878
DIY Slab Flattening Mill
V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.
Build Author Corey Corbin Views 3744
Sphinx Derived Router
I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.
Build Author Yosmany325 Views 1531
OrionPlus
Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).
T Nut Holder for V Slot
This is a T Nut Holder for OpenBuilds V Slot System. Useful when you want to keep t nuts in place, for example when you're mounting something vertically.
Tall OX
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author Leboeuf Views 3607
Cartesian 3d printer
This is the build of a cartesian 3d printer made of an old Anet and Geeeteck, some 2020 alu profil and linear rail. Powered by a Rumba with a Nextion screen. It should be modular and accept dual Extrusion and laser engraving.
Bored in the garage enclosure build
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
Learning how to build
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
Dual Direct Drive Extruder
a dual extruder build using direct drive for flexible filaments
Vulcan Pro V2
Contains a further modification to Creality's poor CR-10 design
A very affordable CNC routing
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
ApiNui - CNC Router ( an oversized workbee )
Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components
Phoenix Alpha
Hobby project
Vulcan Pro V1
A posi-drive leveling printer in 300x300x380mm format that easily breaks down for suitcase size shipping.
Build Author OpenBuilds Views 5324
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
1515 Deluxe
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
MIT E-Vent | MIT Emergency Ventilator
Ventilator prototype based of OpenBuilds Stock parts
Vulcan: 750x1200 V slot 90W Co2 Laser
Tried to get best value and minimal footprint!
Build Author Tristen Poliseno Views 1990
Back and forth rail mechanism
I have the whole description and all the details in the "Body" section!
Build Author Project Hopeless Views 12812
Plywood Built CNC Router
This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.
WorkBee Saving Lives
Using the WorkBee to protect doctors against Corona virus.
Build Author Braden Masse Views 2468
Microwave Filter Tuner
The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.
Build Author Joe F Views 6812
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Build Author Alexander Leiser Views 12617
Paintbot painting cnc
Custom painting machine in designed and wrote the software for. Paintings are with acrylic color on canvas