Build List
-
Active Filters:
2
Build Author dmasters Views 7134
DM C-Beam XXL Tank
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
Build Author Jens Grabner Views 3380
snc98_Slash-Number-Calculator
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
Build Author JWhitten Views 12762
Build #2 - Bigger & Stronger
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Build Author Tucstrlly Views 7385
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author ZacharyB Views 4404
Arizona OpenBuilds MiniMill CNC
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
80watt Lasercutter, workingarea 105x52[cm], steel frame
I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.
Build Author Sonny Lowe Views 14905
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Vertical Mill
This will be a CNC milling machine. My goal is to make this mill for the minimum cost I can while not sacrificing quality. In hope of staring an educational YouTube channel on CNC milling and 3D Printing. Along with when to use both.
Build Author Superslinky Views 8452
K40 Laser Build (Major Changes)
Major K40 Laser Mod
New 2 watt laser platform
Acro based 2 watt laser platform
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
4' by 2' Lasercutter
4foot by 2 foot, 10W El-Cheapo blue laser
Build Author openhardwarecoza Views 70794
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
TrueUp Kit Version
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
Build Author THE LINK Views 4142
2020 First build.
Probably cheapest DIY build youl see.
Build Author JerryD Views 4394
1500x1000mm Adjustable Height
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
Build Author megashub Views 21229
K40 C02 Laser Rail System
An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter
Build Author Beam Views 8986
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author evgeny156 Views 6240
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
Build Author Limine3D Views 7463
M3D Squared
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
The Budget Build
An affordable large CNC machine, that so far has been easy to assemble
Build Author Rick Holder Views 13547
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds
Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author ymilord Views 21308
C-Beam Rigid - 'The Hog'
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
Build Author Matt Barile Views 6046
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author Lumberjack Engineering Views 17862
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author Anthony Bolgar Views 10386
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
delta 3d printer kit
HE3D K200 kit build
Build Author BeTrue3D Views 19741
BeTrue3D Printer
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Hlidskjalf, CoreXYU (dual X-carriage)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Build Author Ronald van Arkel Views 15047
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author Steven Sampson Views 9741
RiNo Route
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
Build Author David Bunch Views 13488
Emmett-Delta
Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.
Build Author Martin Bogomolni Views 10607
Delta-Six ( Jerry426 variant )
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Fun and Functional Laser Build
A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author ymilord Views 11026
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
Build Author Julius Views 23414
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
CO2 laser cutter
A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.
Laser engraving machine
Second better project, high durable mainframe, silent work, non vibration.
Build Author Bridge Port Views 7499
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Rwetzler Views 7880
C-Beam Prototype
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Build Author Neptunes Guitars Views 7284
Neptunes Ox
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
C-Beam Big Mouth
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
Build Author UltiBots Views 9382
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Gargoile reproduction C-Beam™ Machine - Plate Maker
A stock C-Beam with a CNC shield with DRV8825's
Build Author Keteland Views 9678
MULIMATERIAL 3D PRINTER (in progress)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
Build Author Sonny Lowe Views 9696
Folger-Tech Y-Carriage
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
Expanded Routy using 290 build instructions
Using the Routy290 build and an awful lot of help from puntoMX, this machine has been expanded in the X and Y axis. My first build, I'm learning a lot about all of this. I've had to disassemble parts of this thing many times due to forgetfulness, but that's ok. Also, I've forgotten to take constant pictures throughout the build.
Build Author PaulS Views 19318
UltiFaker 2 Go
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
Build Author Gary Bonard Views 5018
OxZilla
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author alex_b Views 13943
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author openhardwarecoza Views 26908
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author inhan Views 19622
Openbuilds rovo laser mini(오픈빌드)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
Phlatformer v2
Hello, I have been looking around for a vacuum forming machine for a long time, and could not find one that was either in my price range or was safe enough for me to want in my home. The Phlatformer answers both of these requirements... Unfortunately, it was not available in either cut-out or...
Build Author DistortedDesigns Views 32240
Project Death Star - DistortedDesigns Laser Engraver
2 watt Laser Engraver, Simple, Fairly Low Cost, and Portable
My Little OX
This build has been an educational experience. Software and hardware alike.
McRouter 3 Axis CNC
I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.
Build Author ymilord Views 17182
Small Portable PCB CNC Machine (CoreXY)
This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.
Build Author Darren Ditto Views 9213
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Build Author Kyo Views 11052
V-Slot Cutting System
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Build Author JoeH Views 6591
COTSPnP
The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.
Build Author sgspenceley Views 180995
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Mendal Max 1.5 EX2 - a part of this, a part of that.
I like this design a lot. It's very stable, very strong and with the EX2 enhancements, it prints like a champ.
Build Author M^3 Views 20277
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
CO2 laser.
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
Delta-Six
Super rigid Delta printer, using 20X40 V-Slot
Build Author sausagePaws Views 71985
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Linear Rotational Art.
One Linear Actuator covering two dimensions, WHAT!