Build List
-
Active Filters:
x5
Sphinx 55 on MGN12 linear rails
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
Build Author BeTrue3D Views 20588
BeTrue3D Printer
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Peter Oakes Views 41939
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
3D PrintBot 500x500x500
Large scale True 500x500x500 build volume 3D printer.
Build Author jjcolletta Views 10409
First 3d build
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
Build Author Dave420 Views 13360
10 x 5 ft plazma table build
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
3D printer inspired by the Bukito
I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.
Big a** printer
In-progress 500x500x1800
Build Author Sir Bagels Views 2242
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
My 5' by 5'
I have constructed frame out of 1 1/2" square tubing. Have my Y aces mounted. and awaiting parts.