Select a Category
Build Author pek Views 35023
Prusa i3 Bear Upgrade V2
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
Build Author Savvas Views 9337
Halloumi CNC Machine - Acetal Plates
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
Build Author CDUH Views 3950
Somewhat Simple Lead screw conversion for an OX CNC
Somewhat Simple Lead screw conversion for an OX CNC.
Build Author Scotty Orr Views 4159
MMXL - A MiniMill Conversion
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
Build Author Ronald van Arkel Views 12130
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author SBLabs Views 8830
C-Beam to C-Beam XL Upgrade
This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.
Build Author Peter Van Der Walt Views 7320
MiniMill Z Axis Upgrade with Offset Motor
Upgrade your Minimill with an off-set Z Axis Motor
Build Author Andreas Bockert Views 3573
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author AndersFaust Views 8624
(R)OX CNC [FR/EN]
Another (R)OX CNC something like build, in French please ! Pics Heavy !
Build Author James Hayes Views 3522
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author Limine3D Views 1856
Shapeoko 1 upgrades
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
Build Author Anthony Bolgar Views 402
CBeam Sphinx Upgrade
Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.
Build Author joetemus Views 1801
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Joe Garritano Views 6583
Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.