Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

RONIN OX | The G10/Carbon Fiber Hogger

Nov 19, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

Small Portable PCB CNC Machine (CoreXY)

Jun 24, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.

bOX

Feb 15, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.

c-beam hello world

Jan 29, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My first ever build. Straight C-beam with tinyg controller a few do-dads and some make do choices. Non-metric length lead screws to save long lead time. Jog knobs to cover the extra length and also practical. My old Bosch Colt never had it so good. Build out work remains, wire dressing, drag chain, vacuum, permanent base, etc.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice