Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

Time Lapse Camera Rail

Nov 6, 2014
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.

DSLR Video Slider

Aug 31, 2014
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

OpenBuilds C-Beam Double Slider

May 20, 2016
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.

Phlat Printer 3 meets Open Builds

Apr 27, 2021
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I will go over the attachments for the PP3 Z axis. soon. Before any thing else .You need to know the first PP3 ,used SKP 7 and Mach 3. Later on they used CNC USB.

openbuilds rovo 1000mmx1000mm(rovo x)(korea)

Jun 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.

OXBear

Sep 3, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.

WannaBe CNC - First time design and build

Apr 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

no xp cnc

Oct 30, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.

C-beam Camera slider

Nov 15, 2015
Category
Camera Sliders - Rigs
Build Progress
Build in Progress...

feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice