Select a Category
Build Author sgspenceley Views 157068
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author Jacob Lotter Views 19960
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author HPB Views 36146
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
Build Author dreys Views 9325
Was once a mini mill
Build Author Sergio Di Ventura Views 6269
Prusa Dragon LR
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Build Author GinoTheCop Views 12170
A 1000 by 1000 CNC Router with linear rails and a control box.
Build Author that-jim Views 1501
Z-Axis Upgrade For My Sphinx
Z-Axis Upgrade For My Sphinx
Build Author brrian Views 3193
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
Build Author txcomp Views 4740
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
Build Author Gary Monroe Views 6719
C-Beam Desktop On Rails
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
Build Author tmadrms Views 4690
C-beam machine mods.
Build Author TurfnSurf Views 4424
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Build Author Wes Dwight Views 4739
Modified Sphinx 55 with MGN12 linear rails
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
Build Author Yanou Fishel Views 4084
Beefed up Minimill
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
Build Author B.Radstrom Views 3769
Black gear 1500X3000
My cnc update and rebuild.
Build Author shanehooper Views 9715
SolidCore CoreXY 3D Printer
Modular and Scalable CoreXY Printer with all metal parts.
Build Author William Grunwald Views 4307
1000mm x 1000mm linear rails, double gantry, build in Process... more to come
Build Author Shortyski13 Views 3754
Mushu - Large Scale CoreXY
20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.
Build Author Forestbird Originals Views 3125
Lead 1010 Build - Anything but stock.
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
Build Author Edgar Mata Views 6631
ME - Core XY 3d printer
I wanted to make my own Voron, so I made my own Voron,
Build Author Bferster Views 1965
1010 with linear rails
Has a 700 by 700 cutting area and is very stable
Build Author Matt Barile Views 5549
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Build Author Yosmany325 Views 1201
Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).