Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    on

CNC FOR EVERYONE!

May 12, 2014
Category
Other Style CNC Mills
Build Progress
Build Complete!

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

Pong CNC

Jun 2, 2016
Category
Everything Else
Build Progress
Build Complete!

This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Hobby OX CNC

Oct 24, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!

CNC Control Box with VFD etc etc

Jan 6, 2019
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

777 CNC Build

Nov 29, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

The FEEDBACK FRACTAL Build

Sep 20, 2019
Category
Everything Else
Build Progress
Build in Progress...

The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.

Rack and Pinion Cartesian Mill

Mar 30, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

Sherline C-Beam with Offline Controller and MPG

Nov 23, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.

"Stung by the Bee" OB Workbee 1010 Build

Oct 4, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Longhorn OX (Under Construction and In Progress)

Mar 30, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.

The Hoss

Apr 9, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

The purpose of this build is to create a simple, strong modular build that is rugged enough to cut out some of the softer metals along with wood and plastics. Using basic parts like the universal plates, t-nuts and v- wheels coupled with the strength of C-Beam I am sure this will deliever the desired results!!

Persnickety Plate Maker

Aug 13, 2015
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...

Hedron's build with Ooznest kit and Xylotex motors

Oct 26, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.

MakerSL MSL-6 DLP 3D Printer

Apr 22, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.

Opening into doors

Jan 29, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.

Modified Sphinx 55 with MGN12 linear rails

Aug 2, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Horizontal CNC V-Beem v1

Sep 16, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.

V-Slot™ X -Y Stage Hidden Acme Rod Example

Sep 17, 2015
Category
Everything Else

An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.

Proteus

Nov 26, 2013
Category
X/Y Table Style Bots

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

Controll Board for CNC Projects

Jul 24, 2014
Category
Circuit - Software Project
Build Progress
Build Complete!

The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.

Another OX CNC Router

Nov 24, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.

Laser cutter project by students

Dec 3, 2015
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.

C-Beam Evolution MkII

May 12, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.

Modular Controller PCBs

Sep 3, 2017
Category
Circuit - Software Project
Build Progress
Build in Progress...

This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.

Rock n Roll

Nov 27, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.

Ball Trajectory Machine

Nov 23, 2018
Category
Everything Else
Build Progress
Build Complete!

Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.

Hyatt and My Journey to Tonehenge

Dec 1, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?

CNC Coating Machine

Dec 1, 2018
Category
Everything Else
Build Progress
Build Complete!

The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.

Workbee "style" 1010 cnc

Feb 12, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.

CubeSpawn Ultimaker 3D Printer Module

Sep 15, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

Sheethexapod

Dec 10, 2016
Category
Everything Else
Build Progress
Build Complete!

Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.

QuorXZ: A String-driven, Core XZ Printer

Aug 31, 2017
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

The QuorXZ doesn't magically appear. It's gestation takes time, careful attention, and requires many parts. However, when it is ready, a magical, mechanical instrument is born....(and when you finally say its name, it sounds a little bit like "corks").

Nightfuel

Feb 4, 2018
Category
Everything Else
Build Progress
Build in Progress...

The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.

Live C-Beam Build @ MRRF2018

Mar 26, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

bOX

Feb 15, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.

OneUpSolid

Oct 11, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is the adult version of the QU-BD juvenile known as their OneUp. It not only uses extrusion framing instead of press board MDF, it is a full sized 8x8 build area w/ABS-Nylon capability. Only the OneUp's single Z axis driver concept is similar. I'm tempted to call it OneUpAdult for marketing.

Work Bench Stand

Oct 29, 2015
Category
Furniture Builds
Build Progress
Build Complete!

Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.

PiDuinoCNC Controller

Feb 23, 2016
Category
Circuit - Software Project
Build Progress
Build in Progress...

Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.

Arctic Ox CNC Router

Jun 25, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice