Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    no

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

RigidOko

Sep 3, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

Sphinx 1050

Dec 4, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.

Simple Cnc System (arduino Grbl)

May 25, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.

DSLR Video Slider

Aug 31, 2014
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

The BEE and ME

Apr 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!

+Laser

Sep 2, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.

Robo Morten

Aug 24, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Pong CNC

Jun 2, 2016
Category
Everything Else
Build Progress
Build Complete!

This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)

SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer

Jan 2, 2017
Category
Everything Else
Build Progress
Build in Progress...

The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.

MULIMATERIAL 3D PRINTER (in progress)

May 16, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build

C-Beam Evolution MkII

May 12, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.

Ball Trajectory Machine

Nov 23, 2018
Category
Everything Else
Build Progress
Build Complete!

Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.

3D Printer 320x220x200

Sep 21, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me

My Belt & Pinion Drive CNC Router

Aug 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!

OpenPull From CNC Kitchen.. attempt

Feb 20, 2022
Category
Everything Else
Build Progress
Build in Progress...

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

Small PCB, Engraving and Delrin CNC Mill

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.

My CNC

Jan 5, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

Arizona OpenBuilds MiniMill CNC

Jan 1, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.

PiDuinoCNC Controller

Feb 23, 2016
Category
Circuit - Software Project
Build Progress
Build in Progress...

Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.

Stock CNC Router

Aug 11, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!

OXBear

Sep 3, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.

the Feedback Fractal project

May 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.

Quack Ball

Mar 5, 2018
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.

1500mmx500mm Kossel Delta

Feb 3, 2017
Category
Delta Bots
Build Progress
Build in Progress...

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

HardKnot OX 4x4

Sep 21, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

LaserShark300

Nov 23, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.

Home build from A to Z

Jul 17, 2022
Category
Laser Cutter Builds
Build Progress
Build Complete!

I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice