Select a Category
Build Author JWhitten Views 8483
Build #2 - Bigger & Stronger
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Build Author mcbuilder22 Views 8405
C-Beam "2" XLarge CNC Router
C-Beam 2XL CNC Router
Build Author Gabriel Faber Views 8350
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author Rob Mahan Views 5478
Rob's C-Beam Machine XLarge
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Build Author rcKeith Views 30925
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author Tucstrlly Views 4950
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author coxnugget Views 1117
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
Build Author Dominic Ross Views 7003
Beaver's OX 1500
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
Build Author Steve hope Views 13339
8x4 CNC build
Routy cnc upgrade.
Build Author KBill Views 11260
1500x1000 (4x2) Router - OX derivative
OX build with 1.5m gantry the 1m deep table.
Build Author Tomas F Uribe Views 3206
2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking
Build Author Michael Burns Views 5887
My Little OX
This build has been an educational experience. Software and hardware alike.
Build Author oni305 Views 3741
An USB Pendant for LinuxCNC / Mach3