Select a Category
Build Author Marshall Peck Views 59269
Voxel OX - Extendable 3D Printer and CNC Platform
An open source 3D printer design with a sturdy V-Slot frame
Build Author ahayden Views 14232
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author blterry1 Views 6990
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author Sonny Lowe Views 18310
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author PaulS Views 14359
UltiFaker 2 Go
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
Build Author Bud Griffin Views 6147
BF3D OX (Big Freakin' 3D OX)
This is my latest printer build. The second printer I've built using V-Slot.
Build Author Joe 90 Views 5881
Schematix OX metal build
OX metal build from an noob
Build Author runninfarmer Views 5883
Mid range build.
Build Author GDanger117 Views 2902
Gantry CNC - Decisions made only to change over and over.
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
Build Author Keith Davis Views 11391
OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.
Build Author Tazilla Views 7186
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
Build Author Lasersc Views 5623
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
Build Author James Archer Views 7649
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author FancyKiddo Views 5306
Triangular CNC Milling Machine
A wonky build to eliminate slop on a long Z axis
Build Author Anthony Bolgar Views 1701
Openbuilds 1050 Sphinx. Thank you to Mark Carew for trading me a set of plates for a spindle and PSU I was not using. Mark is a champ!
Build Author Martin Skov Nielsen Views 3711
Stainless OX kit
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Build Author griso Views 6097
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
Build Author Gary Monroe Views 5519
C-Beam Desktop On Rails
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
Build Author JerwanDavis Views 1655
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Build Author micky ralte Views 1369
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Build Author Polymergraphy Views 6039
Skyggen 3D Printer
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
Build Author Jasen Stengel Views 7924
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Sam Dobbie Views 4776
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author Nicademus Views 4341
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
Build Author Elmo Clarity Views 7577
A TrueUp Glide modified to use 20x40 V-Slot with a 300x300 bed.
Build Author mikev Views 5979
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author AlexLee Views 8612
In Greek mythology, Talos (/ˈteɪlɒs/; Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
Build Author Darren Ditto Views 7668
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Build Author Larry_AK Views 8146
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
Build Author Neil G. Views 8053
STEAM crane printer
The STEAM Crane 3d printer uses the new C-Beam linear rail. It is being developed for an after school / summer camp program for kids. All of the electronics are housed in the base and the wiring is routed down the channels of the c-beam. This is done to contain as much of the loose wiring as possible, hopefully keeping it safer for kids.
Build Author Connor Mckeown Views 2542
My Prusa Build
The process from my bought printer, to a custom home built machine
Build Author J-Wahl Dezign Views 5931
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Build Author nidal Views 9632
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author Joortiz1 Views 2668
Norm Inverted - Cartesian
As a tinkerer and hobbyist I need a reliable quality printer on a budget... Meaning I'm not looking to buy a: Prusa, Zortrax or LulzBot because of the added cost their marketing adds. I can definitely build a machine of hopefully equal quality at a lower cost that is not impacted by the marked-up priced from a large reputable manufacturer. I will need to dedicate time and more time for design shakedowns to ensure I produce a quality machine. Bare with me on this build... Thanks!
Build Author Liam Dahler Views 2237
Affordable Cartesian Printer (Initial Design)
This specific build page is a collection of screenshots sampling some of my initial SolidWorks design and pictures showing physical construction of the initial design. I will be creating individual build articles as I redesign, test, and implement new aspects of the printer.
Build Author Jones Views 1019
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author azarock Views 4835
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Build Author Bob K Views 6482
Dream to practical
This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.
Build Author DiggerJ Views 5933
Pink Panther - MendelMax variant
Taller and wider MendelMax 1.5 spinoff
Build Author Justin Butler Views 4846
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author Glenn67 Views 1598
This started as an attempt to learn to weld and quickly took on a life of its own.
Build Author Mike Andrews Views 6804
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
Build Author techmod Views 5087
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author Fisher Views 3913
My first custom build, using vslot rails for Z and Y and 8mm rails for X. Currently printing parts for this using my Prusa I3. The build volume will be roughly 300mm^3, X and Y are belt driven with 8mm acme lead screws for Z. Will be uploading more info shortly as i continue to build the printer.
Build Author soup3y Views 2660
This build will hopefully be 18x18x24 build space using RAMPS 1.4 with Marlin firmware. Using NEMA 17 motors and belts to drive the X and Y axis, lead screws for the Z axis. The build plate will be heated with a delrin Y carriage for the glass and heatbed. Z axis motors will be top mounted. Possibly and ATX power supply.
Build Author Jeremy Views 7854
Ez3D - Phoenix 3D Printer Build
This is my 1st submission to openbuilds.com and my 1st venture into building a 3D Printer. The Phoenix 3d Printer is a kit from Ez3D, a company based out of Colorado, started and backed by successful Kick-starter and IndieGogo campaigns. The Phoenix 3d Printer kit is currently backlogged 10 to 12 weeks which means quite a wait. I will be chronicling my experience with this kit as I get it done.
Build Author Pol Feliu Views 6148
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project