Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    1

Rezo 1390 100W CO2 Laser

Jul 26, 2023
Category
Laser Cutter Builds
Build Progress
Build Complete!

This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans

V-slot and MDF DeltaBot

Aug 31, 2016
Category
Delta Bots
Build Progress
Build Complete!

This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.

CNC Glass Grinder

Nov 21, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.

MULIMATERIAL 3D PRINTER (in progress)

May 16, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build

C-Beam Upgrade to Larger C-Beam

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!

Hyatt and My Journey to Tonehenge

Dec 1, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?

FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router

Jan 13, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.

Sphinx 66

Apr 17, 2023
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15

openbuilds rovo 1000mmx1000mm(rovo x)(korea)

Jun 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.

Printer1

May 17, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1

Live C-Beam Build @ MRRF2018

Mar 26, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.

1075 Sphinx

Jul 2, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.

Black out Edition Workbee 1010

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

Clear Acrylic Dust Shoe

Mar 17, 2019
Category
Everything Else
Build Progress
Build Complete!

Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.

Frezar - Desktop CNC

Nov 15, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

OpenPull From CNC Kitchen.. attempt

Feb 20, 2022
Category
Everything Else
Build Progress
Build in Progress...

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

Pretty Standard + Slave X Axis

Sep 12, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.

My 1st C-Beam Router

Aug 13, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

CoreXY 3D build one

Sep 20, 2019
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Arizona OpenBuilds MiniMill CNC

Jan 1, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.

Shapeoko 1 upgrades

Mar 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.

My Workbee 1010

Feb 2, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.

Workbee 1010

Jan 11, 2020
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

Hey all looking forward to sharing this build, I’ve learned a lot reviewing many of these great builds.

1250x1000 Build

Jan 9, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.

Lead 1010 Build - Anything but stock.

Feb 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

K40 upgrades

Jan 26, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)

OB Lead 1515 CNC Router 2021

Feb 14, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

Travel Printer

Jun 9, 2022
Category
Polar Bots
Build Progress
Build in Progress...

Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.

Little Big OX

Jun 5, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.

1500mmx500mm Kossel Delta

Feb 3, 2017
Category
Delta Bots
Build Progress
Build in Progress...

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

Barcelona Build

Dec 18, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.

Acro 1010 with 10 watt Laser

Feb 5, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD

Nov 18, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD

Lead 1515 tilting table and vertical table accessory

Feb 23, 2024
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.

pain in my ox

Mar 21, 2015
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

build is in process the machine went together perfectly no issues at all but the software is another issue I have been trying to get the thing dialed in it is driving me nuts I'm still in the process will update if I ever get it figured out

Atlas Delta Bot

Apr 15, 2016
Category
Delta Bots
Build Progress
Build in Progress...

The idea here is to build a nice large delta bot from the parts ground on the one builds part store. Other parts that are sources out side of this will be detailed. I have a simple BOM I started that I will upload later.

1500x1000mm Adjustable Height

Jul 9, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

1 Cubic Meter 3D Printer

Mar 20, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.

ME - Cloner 3d printer

Feb 17, 2022
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice