Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

Fun and Functional Laser Build

Sep 12, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

CNC-machine 650by700

Feb 4, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.

Cricut Expressions 2 to ESP32 GRBL Control

Nov 18, 2018
Category
Everything Else
Build Progress
Build in Progress...

A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.

Sphinx 55 with 3D Printed Addons

Feb 3, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.

Workbee CNC on steroids

Nov 23, 2019
Category
Other Style CNC Mills
Build Progress
Build in Progress...

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

Ox with Gecko Controller and CNC Linux

Dec 26, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

C-beam Router rack and pinion

Sep 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm

OX-SUMO, SUMO-OX, OXSUMO?

Nov 10, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.

Laser cutter

Jun 2, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

In the expo projects during the second year of engineering students. the project group who made this rapport made a laser cutter for the students of Fontys Hogeschool Engineering to use this machine for creating parts for their projects. The goal of Project Laser Cutter is to build a laser cutter, which is safe and can be used within the school. Also it has to be able to cut through 10 millimetres thick acrylic material or 10 millimetres thick plywood. This project will follow the V-model. This

CoreXY Cubish

Nov 16, 2020
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Stainless OX kit

Dec 28, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits

LinearRail - 3D Printer

Jan 10, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

CNC Control Box with VFD etc etc

Jan 6, 2019
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

TrueUp LZ

Apr 6, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.

777 CNC Build

Nov 29, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"

80watt Lasercutter, workingarea 105x52[cm], steel frame

Dec 13, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.

DaveP's Homemade CNC Project

Feb 7, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...

ORCA Laser Build

Mar 28, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This is my take on the Acro Laser system made from mostly salvaged, scrap, or leftover parts. I modified the plates in an attempt to maximize the cutting area and I wanted a lightweight adjustable Z axis.

The FEEDBACK FRACTAL Build

Sep 20, 2019
Category
Everything Else
Build Progress
Build in Progress...

The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.

(Smaug) 100w 1500x1000mm CNC Laser

May 11, 2021
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.

Long Ox with drop in table

Jun 1, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.

OS OX

Nov 15, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.

Angus : A Slightly "Beefier" OX

Dec 1, 2014
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.

PROTODERA 5-axis CNC machine

Jan 17, 2015
Category
Everything Else
Build Progress
Build in Progress...

We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.

Adamantine

Dec 13, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.

Delta 3d Printer

May 27, 2015
Category
Delta Bots
Build Progress
Build in Progress...

I am going to use this as a build log for my delta 3d printer build. I have access to a MakerBOT to print some of the parts. I am still finishing up a few of the design elements but the idea is to have a rigid unit to eliminate deflection in components and maintain accuracy.

FRANKINATOR -- My CNC Router Built Around The C-Beam Rail

Feb 2, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer

Jan 2, 2017
Category
Everything Else
Build Progress
Build in Progress...

The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.

Large C-Beam Sphinx style CNC Build

Jan 12, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.

Sandy3D wall mounted 1000 mm x 1000 mm C Beam Mill

Jun 7, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

I am attempting to mount The C-Beam Machine XLarge on the wall and have it look like a piece of art and be totally functional as this will be in our livingroom.

Bedroom Builds (BrB) DIY CNC

Jan 12, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.

CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)

Mar 5, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.

Coined by my family as the: Davomatic

Aug 12, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.

"Stung by the Bee" OB Workbee 1010 Build

Oct 4, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Plywood Built CNC Router

Apr 10, 2020
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.

Beefed up Minimill

Aug 24, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice