Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

C-Beam Mini Mite

Jul 9, 2022
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.

CNC xPRO Driver

Oct 9, 2017
Category
Circuit - Software Project
Build Progress
Build Complete!

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

Black Rabbit 1500

Sep 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.

Improved CBM

Dec 9, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.

The Floating Dust Shoe

Feb 15, 2018
Category
Everything Else
Build Progress
Build Complete!

I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.

The Plastic Beast CoreXY Printer

Feb 28, 2018
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.

V-Baby CoreXY - Quality Engineered DIY 3d Printer

Sep 16, 2019
Category
H-Bot and Core XY
Build Progress
Build Complete!

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

G&C Printer

Oct 15, 2015
Category
H-Bot and Core XY
Build Progress
Build Complete!

The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.

C-Beam Machine XL

Feb 9, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.

PhlatPrinter MK 3

Jun 20, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.

BlackBox Motion Control System

Nov 1, 2019
Category
Circuit - Software Project
Build Progress
Build Complete!

The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.

45W CO2 Laser Build

Jun 10, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.

Portable self-contained Lead 1010 table

Jul 18, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.

DSLR Video Slider

Aug 31, 2014
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

Designer Jeans with a Laser

Nov 1, 2015
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!

RONIN OX | The G10/Carbon Fiber Hogger

Nov 19, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

OX Super "C" - Cpmpleted 11/02/16

Dec 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.

Reference sensor for CNC Tools

Nov 1, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

For the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis? You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon. With the Sensor, you can define the zero position of the piece automaticly.

MMXL - A MiniMill Conversion

Oct 29, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

WorkBee 750x750 build

Apr 19, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).

OTiS 500mm

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.

The Growler

Feb 27, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.

Niko’s Egg-painter robot (OpenBuilds)

Mar 31, 2015
Category
Sphere Bots
Build Progress
Build Complete!

This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)

RSW's C-Beam Build

Feb 18, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I built a CNC Router using 3/4 MDF, 1/8 aluminum angle for bearing races and various other odds and ends. I learned a lot about how not to build a CNC router. I found Openbuilds.com and decided to build a C-Beam for my first build. The long term idea is to use this machine to build custom plates for and OX type machine and a 3d printer.

Hydraulic lifting table

Nov 30, 2017
Category
Everything Else
Build Progress
Build Complete!

I started this project without drawing. in itself this went fine with some minor adjustments. My profession is machine builder that might make it a little easier. I still enjoy it every day.

Peristaltic pumps, Automatic Cocktail mixer

Apr 3, 2019
Category
Everything Else
Build Progress
Build Complete!

This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver

Laser Displacement Golf Ball Scanner

Jul 26, 2019
Category
Turntable 3D Scanner
Build Progress
Build Complete!

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

Minimalist Laser Platform

Aug 18, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.

All in One Grill -Mangal Schaschlik Döner

Aug 17, 2014
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

I create for some Years this all in one Grill. This Grill is without wellding, only fixed with screws. My Grill is 5 years old and look so, as at the first day (no moving away). The drawings and discription (sorry only in German, but with some pictures) to Download as PDF file. The unwindings to Download as DXF and GEO (Trumpf Laser) file. Have fun to build and Grill

Jim's C-Beam Machine Build

Jan 29, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

BinaryConstruct V3

Mar 2, 2018
Category
X/Y Table Style Bots
Build Progress
Build Complete!

This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.

Griffin Delta Printer

Mar 9, 2014
Category
Delta Bots
Build Progress
Build Complete!

Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.

Roberta Clementine

Jun 9, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors

Sphinx 55

Feb 10, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

Tool position setting Part III.

Jan 29, 2014
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

In this, the final part, I would like to introduce Machine Vision and show how it can be used, not only for tool position setting but also for resolving the triangle to calculate the G68 (local system rotated) for jobs which are not squarely placed on the work table.

Routy GT2 300 BSX CNC Router

Jun 24, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.

DTG OX

Oct 28, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.

CNC Router Lathe

Feb 11, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.

OneZ

Jan 7, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

Hot Wire 4 Axis CNC Foam cutter

Nov 14, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now

Gantry CNC - Decisions made only to change over and over.

Jan 11, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

+Laser

Sep 2, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.

Shapeoko 2 - my first CNC

Jan 4, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice