Welcome to Our Community

Some features disabled for guests. Register Today.

Laser Displacement Golf Ball Scanner

Jul 26, 2019
Category
Turntable 3D Scanner
Build Progress
Build Complete!

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

LS-LASER

Oct 3, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

Custom build 80w Co2 Laser Cutter

Aug 7, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.

Beamlazer Laser cutter CO2 100W

Sep 30, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

OpenBuilds ACRO System

May 8, 2019
Category
DRAWBOT/ARTBOT
Build Progress
Build Complete!

The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.

Simple Cnc System (arduino Grbl)

May 25, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.

UK40OB

Oct 21, 2017
Category
Laser Cutter Builds
Build Progress
Build Complete!

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

3D printed Laser Engraver

May 8, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area

Much4 - LaserV printed version

Feb 5, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.

Workbee CNC Router/Laser/Plotter

Mar 16, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A CNC machine with a massive 30x30" work area, that supports a router, laser, plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.

Laser Cutter/Engraver OptLaser 6W with Z-axis

Dec 8, 2017
Category
Laser Cutter Builds
Build Progress
Build Complete!

This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.

K40 12x24in rebuild (In Original Case)

Feb 14, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.

Desktop 4-Axis Nema 23

Apr 6, 2018
Category
CNC LATHE BUILDS
Build Progress
Build in Progress...

This build is specific to a furniture design I am trying to bring to market. My first attempt to build a machine. I have looked at other build submissions to help me figure out where I would like to start. The workable volume should 36" W x 6" D x 6" T. The goal is to become more comfortable with the electronics side of machines I enjoy using and also lower the cost of my product by reducing man hours in the manufacturing process. Yay!

Portable Diode Laser Cutter

Jan 2, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

A simple XY laser engraver/cutter

May 31, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

Laser cutter

Nov 30, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Full aluminium profiles construction. Synrad 50w CO2 laser. Ruida controller. Yaskawa servo motors

ECNCML (budget mashup)

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.

LaserShark300

Nov 23, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.

+Laser

Sep 2, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.

Laser V

Feb 15, 2014
Category
Laser Cutter Builds

With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products

CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)

Mar 5, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.

ORCA Laser Build

Mar 28, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This is my take on the Acro Laser system made from mostly salvaged, scrap, or leftover parts. I modified the plates in an attempt to maximize the cutting area and I wanted a lightweight adjustable Z axis.

CUT SMITH

Mar 9, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.

"AcroCadabra" My Acro Laser built with my C-Beam XL

Mar 15, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

Update Eleksmaker with Openbuild eccentrics for X-Carriage

Jan 10, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple approach to making the Eleksmaker A3 Laser build have a better functioning X-Carriage! Of course this assumes you bought an Eleksmaker A3 or plan to.

My 80w Laser build (1000x1000 cutting area)

Dec 29, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This is a 80w laser which I am building (picture of the case) the frame is constructed with normal square tubing with plastic corners. this laser needs to live outside

Designer Jeans with a Laser

Nov 1, 2015
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!

80watt Lasercutter, workingarea 105x52[cm], steel frame

Dec 13, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.

PCBman CNC

May 12, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This is a design for a desktop CNC machine. It may be a router or laser. I am undecided as to the final design.

CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds

May 11, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.

Kruk 0.1

Nov 27, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

Hobby OX CNC

Oct 24, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!

Fun and Functional Laser Build

Sep 12, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.

mBOX

Sep 25, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )

CO2 laser

Sep 10, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.

CO2 laser cutter

Aug 16, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

Update for my 3D Printer - Big Size

Jul 19, 2016
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

I like combo machines, so I upgrade my 3D Printer with a Laser. It is a double head combination. The Laser is easy removable.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice