Select a Category
Build Author checkeredBug Views 58
Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.
Build Author Aaron Newsome Views 40
Yet Another LEAD CNC Build
My take on the LEAD CNC build. Followed the instructions and I think it came together very nicely. Added a few of my own touches to finish up the build.
Build Author obmilllivebuild Views 1576
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
Build Author rkugler Views 1189
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Build Author j0achim Views 5212
CoreXY - e3d inspired
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
Build Author Colin Mccourt Views 1704
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Build Author gonzachus Views 3305
1000 x 1000 Workbee powered by X controller
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Build Author HC.Carbo Views 3472
C_Beam X5L Hybrid_Tank
classic router with a ab table
Build Author Srđan Marković Views 146
I am satisfied with my build and next one will be even better.
Build Author DakotaBusy Views 570
OX (Large) CNC
Building a Large OX CNC Open Build on a fold down table.
Build Author Spark Concepts Views 3169
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author Jacob Lotter Views 3055
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author mytechno3d Views 10605
Dragon Plasma cutter
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
Build Author Peter Stoneham Views 702
Large 'Double H-Bot' using Openbuilds 2040 v-slot
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
Build Author Mark Carew Views 5482
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author piyawat thongchan Views 2562
Draw bot core xy
In the design stage. Help guide.
Build Author Troy Proffitt Views 2617
Sphinx Upgraded plates / ballscrews and linear rail
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
Build Author Mark Carew Views 853060
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Mark Carew Views 18163
OpenBuilds LEAD CNC
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
Build Author Keith Davis Views 5892
A beefed up modification of the TrueUp Kit project
Build Author pek Views 26522
Prusa i3 Bear Upgrade V2
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
Build Author SecretSpy711 Views 6600
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author Sebastian-Schuetz Views 1454
Open source large format CNC-machine and 3D printer
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
Build Author openhardwarecoza Views 53572
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
Build Author skarab Views 15725
iTopie RepRap - 3D Printer
A stable and strong 3D printer made of 16mm MDF and machined on my OX.
Build Author jdeglavina Views 1510
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author Alex Chambers Views 3048
Workbee with Duet controller
Workbee 1010 with Duet controller from Ooznest
Build Author Mark Carew Views 2727
Nema 23 Belt and Pinion System
This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!
Build Author Ariel Yahni Views 719
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author Mark Carew Views 91029
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author HuguesP Views 217
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
Build Author CoreCube3D Views 4730
CoreCube3D - A CoreXY 3D Printer
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
Build Author Joe Young Views 2516
Rack and Pinion (Death to Belts)
Low profile rack and pinion linear actuator design
Build Author wastelandfab Views 2861
Large format plasma ox
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
Build Author Rob Taylor Views 1458
Grizzly G0758 Benchtop Mill Conversion
A proper CNC mill conversion. But quite small, with my trademark idiosyncracies.
Build Author crypt-tek Views 1232
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Build Author joetemus Views 6573
K40 ACRO Conversion
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
Build Author Matt586 Views 2301
Kraken Core-XY Printer
Core-XY build witha quad nozzle
Build Author David Bunch Views 4060
Sphinx 55 with 3D Printed Addons
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Build Author JerwanDavis Views 1679
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Build Author crystaldragon141 Views 3294
Rostock TETRA V0
This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.
Build Author Mark Carew Views 8705
OpenBuilds Sphinx 1050
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
Build Author John Pollman Views 727
Wanhao Duplicator i3 Plus - Major rebuild.
Major rebuild of my Wanhao Duplicator i3 Plus.
Build Author Gerald Klein Views 4439
300mm Diameter, 1 Meter tall, Delta 3d Printer
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
Build Author Bikes and Beer Views 1008
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Build Author superwoodle Views 733
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Build Author pedrofernandez Views 1341
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
Build Author RoosterTX Views 1152
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author mohammadyzr Views 2695
Noor CNC Designed by Mohammad Yazdi Rad www.yazdirad.com
Build Author skarab Views 54230
Much4 - LaserV printed version
By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.
Build Author Troy Proffitt Views 19674
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author msdosfx Views 963
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author Chazg Views 314
Indoor Drumline Props
Build Author Mark Carew Views 19714
OpenBuilds WorkBee 1510
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author Sonny Lowe Views 8370
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Spark Concepts Views 679
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author thinman Views 2047
A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.
Build Author CChico Views 5851
Custom build 80w Co2 Laser Cutter
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
Build Author Michael LaBombard Views 369
My Workbee build
Workbee, 1000mmX750mm , from China
Build Author Scott Martinez Views 2446
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Moag Views 70334
C-Beam Machine XLarge
A rigid and wide format, plate and carving CNC.
Build Author Daid Views 1247
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
Build Author Cosmosteel Views 504
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author Leonard Cross Views 4195
Workbee CNC Router/Laser/Plotter
A CNC machine with a massive 30x30" work area, that supports a router, laser, plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
Build Author MarkM_NJ Views 9763
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author CharlieShimota Views 8314
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Keith Davis Views 4565
A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.
Build Author Hidro669 Views 204
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Build Author JamesL Views 3817
C-Beam Machine Build
This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.
Build Author Santoferr Views 2551
Butterfly 3DP V 1.0
tronxy x3 like
Build Author Mark Carew Views 1002
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author skarab Views 56749
A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.
Build Author Mark Carew Views 1905
V-Slot™ Nema 23 Linear Actuator Build (Belt Driven)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
Build Author Metalguru Views 8402
C-Beam Machine Too
C-Beam Machine upgrade using linear rails to increase machining size by 2.5 times and increase rigidity
Build Author Gino Lanzi Views 5140
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author holographic Views 941
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author devloop Views 12360
5 X 5 Plasma SIMPLE Build
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
Build Author Retsaj Views 2258
Large 3D Printer 5ft by 5ft print bed
New ultra large 3D Printer design. I'm calling it the AutoCrafter
Build Author Shelby Teknologies Views 414
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author Mark Carew Views 175476
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Spark Concepts Views 58406
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author Aleksandar Views 10401
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.
Build Author patnap71 Views 993
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author dreys Views 4243
Behemoth cnc router with linear rails
Behemoth cnc router build in progress using hiwil rails and closedloop servos.
Build Author Mark Carew Views 77198
V-Slot™ Nema 17 Lead Screw / ACME Driven Actuators
Example model of lead screw driven actuators for your next project!
Build Author Vegard Humlen Views 945
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Build Author Natesbox Views 1512
OpenBuilds LEAD Machine 1010 40" x 40"
Openbuilds LEAD machine 1010 build
Build Author RobSaunders Views 7037
Laser Cutter/Engraver OptLaser 6W with Z-axis
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
Build Author tshilling Views 1404
K40 12x24in rebuild (In Original Case)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
Build Author CNCMD Views 6534
Heavy Duty build with 1605 Ballscrew and Linear Rail
Build Author Dexter Oddwick Views 4709
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Ryan Lock Views 95352
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Carl Feniak Views 221977
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author evilc66 Views 24208
LCD Based SLA Resin Printer
SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.
Build Author Ollieg Views 1693
Starting my build 2.8mx1.4m
Starting my cnc router, laser and plasma using aluminium 80x80
Build Author Lasersc Views 5635
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
Build Author Colin Hart Views 316
A Journey on the WorkBee Build...
Build Author Roy Berntsen Views 5918
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
Build Author Metalguru Views 1661
WorkLead, no wait, LeadBee, naw... WoodWorker
Improvements on the Lead machine using some Workbee parts
Build Author wojak Views 1091
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach