Build Author sausagePaws Views 53265
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Build Author Robert Hummel Views 45622
890KV OX RC spindle
This build is intended as a light alternative to the Dremel rotary tool.
Build Author Sonny Lowe Views 10259
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Naomi Wu Views 5105
Naomi Wu's Automatic Bartender- BarBot!
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
Build Author sausagePaws Views 1691131
DIY Embroidery Machine V2
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
Build Author uGen Views 12915
Lab Power Supply + Soldering Station
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Build Author Mark Carew Views 55314
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Greg Wroblewski Views 5746
Acro Pick And Place Machine
This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.
Build Author Mark Carew Views 61351
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Mac6986 Views 4682
Vinyl Application Roller table
Build progress of custom roller table for applying graphics
Build Author Mark Carew Views 23487
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author Rick 2.0 Views 4422
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Build Author Eric Jacobsson Views 4619
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Bridge Port Views 5430
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author rkugler Views 2734
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Build Author Makerparts Views 4773
Cbeam Digital Mitre Saw Fence
Work in progress.. but nearing completion :)
Build Author pek Views 2536
V-Slot Hand Cutting Jig
To help cutting v-slots with hand saw
Build Author Joe Young Views 2251
Goliath - CNC + 3D printer Hybrid
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
Build Author Peter Van Der Walt Views 2217
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
Build Author Don Crawford Views 5758
Table Saw Fence
Trying to build a low cost table saw fence using v-wheels
Build Author robbell Views 10199
OX-Based Self-Contaned HVLP Spray Booth
A CNC HVLP spray booth based on OX.
Build Author HuguesP Views 1423
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
Build Author Joonie65 Views 2270
Hydraulic lifting table
I started this project without drawing. in itself this went fine with some minor adjustments. My profession is machine builder that might make it a little easier. I still enjoy it every day.
Build Author Savvas Views 11285
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author Gerrald Views 3382
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Build Author blindflight Views 423
Open Builds C-Beam K-cup holder
Making use of c-beam I have had left over from projects.
Build Author Ariel Yahni Views 2387
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author Jonathon Duerig Views 6267
Archivist Quill Book Scanner
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
Build Author Peter Van Der Walt Views 3099
The Almost Perfect 3 Way Mitre (with MakerLinks)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Build Author The Dude Views 7563
Flexible Axis Revolving Tool-holder
Drag knife and pen holder which mounts in spindle collet.
Build Author Cortellini Views 1742
The FEEDBACK FRACTAL Build
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
Build Author mcbuilder22 Views 1803
Automatic spray machine.
Build Author john cuervo Views 13067
PROTODERA 5-axis CNC machine
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
Build Author MTO Views 1669
Absolute positioning hardware and software
Absolute linear positioning using deBruijn sequences.
Build Author MattR Views 3850
Cricut Expressions 2 to ESP32 GRBL Control
A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.
Build Author RobertCanthal Views 161
C-Beam Dust Shoe
A short description of the dust shoe I made for my machine.
Build Author Anthony Bolgar Views 5566
Spindle cooling setup
Cooling system for water cooled spindle.
Build Author Kyo Views 8694
V-Slot Cutting System
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Build Author Zenmaniac Views 7873
4-axis C-Beam Hot Wire Wing cutter
4-axis CNC Hot wire foam wing cutter
Build Author Gino Lanzi Views 6143
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author Mohsen Abbasi Views 5271
Portable Foam Cutter
A portable foam cutter to make your forms everyware using a LiPo Battery.
Build Author Ruslan Nasirov Views 8193
CNC Hotwire Foam Cutter
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
Build Author Vegard Humlen Views 1778
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Build Author mytechno3d Views 1122
Crypto Mining rigs with vslot rail
Build Author JoeH Views 5572
The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.
Build Author Mark Carew Views 42535
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author Jonathon Duerig Views 5697
CNC Glass Grinder
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
Build Author Jinx117 Views 3966
V-Slot Linear Actuator Bundle
v-slot linear actuator build.
Build Author Venturebit Views 4621
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author Mark and Oreo Views 650
Cnc od grinder and thread grinder
This is a totally original build of an od id grinder and thread grinder, I hope.
Build Author lewac Views 6336
PnP 4 axis small/fast machine
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Build Author James Evanko Views 1474
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author Jacob Lotter Views 1459
CNC ESS Controls System
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Build Author Shelby Teknologies Views 2274
Pick and place
Openbuilds Pick and Place using ideas from OpenPNP Frame work is from the Openbuilds Part store using 1000mm C beams and vslot 40x40 for support Surface is 3/4 " Particle board
Build Author Chazg Views 1048
Indoor Drumline Props
Build Author Peter Van Der Walt Views 3741
The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)
A quick and easy way to make a 3-way mitered corner using Corner Connectors
Build Author Sonny Lowe Views 715
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Build Author John J Talavera Views 5570
A simple low cost rotomolder.
Build Author winand Views 4915
Small drill press fence
A small build using some small vslot scrap piece which shows the versatlity of the v-slot system
Build Author Edgar Robles Views 2347
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author MTO Views 1106
DIN 35mm -like quick clip for 20mm extrusion
A half baked idea for mounting electrics and electronics using a 35mm-DIN-rail-like mounting.
Build Author David Hartkop Views 947
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Kanu Views 575
Filament winder ( carbon fiber )
Carbon fiber filament winder
Build Author Rodrigo Gonzalez Views 1451
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author CreativeTools Views 5132
Universal stand-alone filament spool holder (Fully 3D-printable)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
Build Author MTO Views 2296
C-beam upgrades to my power tools
Just some repairs and upgrades to my drill press and mitre saw using c-beam.
Build Author MTO Views 7924
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.
Build Author Jonathon Duerig Views 4188
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
Build Author Sonny Lowe Views 3476
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author Cosmosteel Views 1405
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author MTO Views 590
3d printable galvos
Build Author DylanWarrick Views 1231
Sim Racing rig
Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds
Build Author Mario A. Arevalo Views 996
Screen Mesh Stretching
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
Build Author Kedals Views 667
Small Slot Cutter
A build to cut .008 inch slots into JB Weld.
Build Author Maxime Favre Views 3141
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Build Author Anthony Bolgar Views 3199
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author Sir Bagels Views 564
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author Mark Carew Views 213
Get organized with the SharkBits Holder!
Build Author Robert Huxford Views 1911
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author John J Talavera Views 6272
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author Anthony Bolgar Views 1574
Clock repair stand
Open source clock movement stand
Build Author Ken376 Views 1761
Welded project cnc first try
Kind of hard to see in this pic now lining up drive s and finishing framework
Build Author wesner0019 Views 6930
12.5" x 12" Assembled Heated Build Plate
Custom build plate for 300mm x 300mm (12"x12"). The hole pattern is for the 20x60 V Slot
Build Author Jose A. Molina Views 4508
Remote Controlled Robot Spider(Teaching Tool)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
Build Author crispin Views 630
Hi my name is crispin and I'm an aluminum addict.
Build Author Shelby Teknologies Views 862
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author Rusticalmond Views 8278
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.