Welcome to Our Community

Some features disabled for guests. Register Today.

Cartesian Style CNC

    • Featured Builds

  1. OpenBuilds OX CNC Machine
    OpenBuilds OX CNC Machine
    44
    154
    1172369

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

CUT SMITH

Mar 9, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.

D&R Tiger Paw build combo

Feb 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.

frugal-ist workbee

May 3, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)

Rock n Roll

Nov 27, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.

Sphinx 7575

Dec 27, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Sphinx CNC modified to 750mm x 750mm c-beams. Parts not readily available in South Africa, so i have to make some modifications...

The Growler

Feb 27, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.

Frezar - Desktop CNC

Nov 15, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

Openbuilds CNC (witthuhnCNC XKLBR-1S)

Feb 25, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.

Sphinx 55

Feb 10, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

WorkBee CNC build - My honest opinion, tips and help

Sep 14, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.

Ooznest OX CNC Machine

Sep 17, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

INDY-TR12 CNC (12mm Diameter Lead Screws)

Jun 7, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

C-beam Router rack and pinion

Sep 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm

YAPCNC (Yet Another Poor's Man CNC)

Jul 12, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.

Modified Sphinx 55 with MGN12 linear rails

Aug 2, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Gigantesque CNC

Feb 22, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.

Plastic Monstrosity

Nov 17, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

Little Big OX

Jun 5, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.

ROUX - A Routy-OX Hybrid

Aug 1, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.

HardKnot OX 4x4

Sep 21, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

Another OX CNC Router

Nov 24, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.

no xp cnc

Oct 30, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.

Our OX CNC Router Project

Nov 21, 2014
Category
Cartesian Style CNC
Build Progress
Build Complete!

Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!

Aluminum OX build with some modifications

Mar 15, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is my OX CNC router. It has been a labor of love for over a year now! I hope you find it interesting and inspiring! I also hope that it gives some of you more experienced CNC builders a different perspective and some ideas!

ChadRat's ox

Jan 4, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first cnc router. I like the open builds concept. I bought parts when I had the money. It seems everytime i think i have all the parts, i find something I am missing. My controller won't be ready until the end of the month so I am in no hurry. I will add things that i find. Eager to make some saw dust.

MOX CNC

Jan 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103

CNC NT

Mar 9, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is our first CNC project is based on OX CNC. We show you some pictures about our progress. We finished assembly design, software test and drivers test, now we are building the machine.

Tall OX

Jun 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates

Longhorn OX (Under Construction and In Progress)

Mar 30, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.

The FOX

Apr 29, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be an OX based machine which I've designed to make the best use of my materials, be as precise as the design allows and operate as quietly as possible. I live in an apartment complex so space and noise are two important factors for me. Therefore the machine needs to do as much as possible while using little space and not annoy the neighbours.

BABE - CanUSA Blue OX, bigger than the average OX

May 6, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.

Custom OX Build

Apr 27, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!

Norwegian OX

Jun 8, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is based of Ooznest 's OX CNC Mechanical kit (500x750) with a few mods if all goes as planned.

First Ooznest OX

Jun 2, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko

3 Axis MultiTool - 3D printer, CNC Mill and Plasma Cutter

Jun 25, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

So in short this build is a work in progress; it aims to make a large 3d printer, medium size CNC mill and a small plasma cutter all in one CNC unit.

openbuilds rovo 1000mmx1000mm(rovo x)(korea)

Jun 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.

McRouter 3 Axis CNC

Jul 9, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.

Vic Aussie Ox

Jul 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.

Cousin CNC OX Router

Nov 1, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.

1200 x 2700 CNC based on OX

Aug 20, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Preliminary design for cnc based on OX for cutting wood sheet products (ply, MDF etc.) for a sheet size of 1200mm x 2700mm

My Belt & Pinion Drive CNC Router

Aug 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice