Welcome to Our Community

Some features disabled for guests. Register Today.

TrueUp LZ

Nov 8, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.

DIY Ultimaker

Nov 4, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.

Mini D-Bot

Oct 30, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.

ivern

Oct 28, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Toying around a concept. Inputs are welcome on whether to use lead screw or belt drive. My lead screw will be single start 500 mm lenght, 2 mm pitch and 2 mm lead. Nema 17 motors will be used. All veterans, suggestions please.

ZideX

Oct 12, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.

Core-XY Cube

Sep 21, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

QuorXZ: A String-driven, Core XZ Printer

Aug 31, 2017
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

The QuorXZ doesn't magically appear. It's gestation takes time, careful attention, and requires many parts. However, when it is ready, a magical, mechanical instrument is born....(and when you finally say its name, it sounds a little bit like "corks").

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Indie i2

Aug 2, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

Norm Inverted - Cartesian

Aug 2, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

As a tinkerer and hobbyist I need a reliable quality printer on a budget... Meaning I'm not looking to buy a: Prusa, Zortrax or LulzBot because of the added cost their marketing adds. I can definitely build a machine of hopefully equal quality at a lower cost that is not impacted by the marked-up priced from a large reputable manufacturer. I will need to dedicate time and more time for design shakedowns to ensure I produce a quality machine. Bare with me on this build... Thanks!

Codename: Gargoyle

Jul 11, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A stout 3D printer build with the hopes of being able to serve as a light mill (PCB) and laser engraver

HUGE 3D printer build

Jul 8, 2017
Category
X/Y Table Style Bots
Build Progress
Build Complete!

just wanted to share my build of a huge 3d printer. It stands just over 2 meters tall and has a total print area of around 850mm x 850mm.

Double D-Bot 400mm x 400mm x 600mm

Jun 2, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.

InDoreXY

May 31, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.

CoreXY Cubish

May 31, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

FLSUN Kossel 3D printer

Apr 27, 2017
Category
Delta Bots
Build Progress
Build Complete!

A brief write up of the making of the FLSUN Delta Kit. This kit is based on an open source design. I had a need for a 3D printer without the desire to dive into another project, so a kit was the obvious way to go. I already have a delta printer in the works and so this is more of a stop gap in the interim.

FFF 3D printer 2x2x2m

Apr 24, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The 3D printer will be able to print 2x2x2m components and not just in PLA or ABS. It's not just a DIY printer but I'm trying to apply engineering formulas to make it. I'm going to apply the state of art for 3D printing and scannering existing.

CoreXY 3D build one

Apr 19, 2017
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

OneZ i3

Apr 19, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.

TrueUp Glide

Apr 14, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Schreibotics Fabricator MkII

Apr 14, 2017
Category
Resin Style Bots
Build Progress
Build in Progress...

It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.

1.4 meter tall build height, 300x410mm build plate cartesian

Mar 26, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.

Live D-bot build at MRRF 2017 (Mar 25-26)

Mar 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.

RSW's 3D Printer Build

Mar 15, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I recently completed my C-Beam Plate Maker build ( http://www.openbuilds.com/builds/rsws-c-beam-build.4286/ ) and quickly got the build bug. I was looking for something to make with the new C-Beam and decided its time to venture into the 3D printer world. I can honestly say I have never been in the same room with a 3D printer, so this is going to be a learning experience. I spent some time browsing the 3D printer builds and finally decided to copy the Talos3D by AlexLee.

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Large Delta Printer made from scrap 80/20

Feb 10, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This printer will leverage scrap pieces around the shop to fulfill a single print's needs. It will use a combination of 80/20, OpenBuilds, and 3D printed parts.

betterBot

Feb 10, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.

Old Faithful...FDM/CNC machine

Feb 9, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I've owned some pretty unreliable printers, and I'll leave it at that... This design comes from the need to have a 3D printer that is reliable, period. I didn't have the money for a several thousand dollar 3d printer with an equivalent build area so that was out of the question. Plus as a fledgling Engineer, I really wanted to blood myself on a project. And that's how Old Faithful came to be. A simple, reliable, rigid, durable machine. Made by me :) Also, it'll be tough enough for light CNC.

1500mmx500mm Kossel Delta

Feb 3, 2017
Category
Delta Bots
Build Progress
Build in Progress...

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

Hlidskjalf, CoreXYU (dual X-carriage)

Jan 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

LinearRail - 3D Printer

Jan 10, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

PowerBot

Dec 12, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.

SCoreXY

Dec 7, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

mBOX

Sep 25, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )

V-slot and MDF DeltaBot

Aug 31, 2016
Category
Delta Bots
Build Progress
Build Complete!

This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.

CORE XY 3D Printer

Aug 24, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.

3D printer inspired by the Bukito

Aug 22, 2016
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.

C-Beam based modular Resin Printer

Aug 10, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.

bertha

Aug 8, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This build will hopefully be 18x18x24 build space using RAMPS 1.4 with Marlin firmware. Using NEMA 17 motors and belts to drive the X and Y axis, lead screws for the Z axis. The build plate will be heated with a delrin Y carriage for the glass and heatbed. Z axis motors will be top mounted. Possibly and ATX power supply.

C-Bot

Jul 23, 2016
Category
H-Bot and Core XY
Build Progress
Build Complete!

A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.

Archer - An extendable all metal 3D printer

Jul 15, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.

3d nika

Jul 3, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.

Loading...
Loading Build images...