Welcome to Our Community

Some features disabled for guests. Register Today.

C-Bot

Jul 23, 2016
Category
H-Bot and Core XY
Build Progress
Build Complete!

A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.

Indie i2

Aug 2, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

LCD Based SLA Resin Printer

May 3, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.

OneZ i3

Apr 19, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.

TrueUp Glide

Apr 14, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

OpenBot

Jun 3, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.

Double D-Bot 400mm x 400mm x 600mm

Jun 2, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.

SimplrBot

Jul 2, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.

OpenXY

Nov 30, 2015
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.

ZideX

Oct 12, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.

Makerparts.ca Prusa i3Pro 300

Mar 12, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Concept for a Prusa i3 made from Cbeam Extrusion. X & Y using GT2 Belts, Z using Acme Screws Goal is to build a simple. and very Solid Printer Single Z Motor to keep the Z Screws in Sync. (Might require Geared Nema 17) 12" x 12" x 12" Build volume Nema 17's

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

G&C Printer

Oct 15, 2015
Category
H-Bot and Core XY
Build Progress
Build Complete!

The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.

SCoreXY

Dec 7, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.

Lautr3k RepRap

Feb 12, 2015
Category
Cartesian Style Bots

A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.

UltiFaker 2 Go

Mar 21, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

Triple C-Bot

Aug 14, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

My 1st Build - Delta Printer with 3 filament hot end

Jun 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

The build area will be fully enclosed. I anticipate using primarily ABS, and have interest in the soluble support materials as well. The main components to date include: OPENBUILDS - 3 x C-Beam™ Linear Actuator Bundle, 1000 mm, w/ Included NEMA23 Motor) Extruders (3) - [Sintron] 1.75mm Mini All Metal MK8 Extruder Hot End - reprap diamond Control board - RUMBA Stepper drivers - DRV8825 StepStick Power supply - eTopxizu 12v 30a

Roberta Clementine

Jun 9, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors

OneZ

Jan 7, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

3D Printer - Big Size

Feb 14, 2014
Category
3D PRINTER BUILDS

I creat a open source 3D Printer to print big things. Print size: 400x500x300 mm. You can download the Drawing in PDF and in Inventor 2013 format. The unwinding drawings are also included. I take some detail photos for a better understanding.

Griffin Delta Printer

Mar 9, 2014
Category
Delta Bots
Build Progress
Build Complete!

Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.

BldrBot Pro

Nov 13, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A completely belt driven cartesian design with a center mounted X motor. This is a very compact, rugged design.

RepRap Tuga

Jan 8, 2014
Category
Other Style 3D Printers

This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.

Richrap 3DR Mashup

Dec 31, 2013
Category
Delta Bots

A work in progress. working to refine the print head/carriage to integrate a bed level probe directly into the print head.

blackcat3d printer

Mar 1, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......

Hlidskjalf, CoreXYU (dual X-carriage)

Jan 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

RSW's 3D Printer Build

Mar 15, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I recently completed my C-Beam Plate Maker build ( http://www.openbuilds.com/builds/rsws-c-beam-build.4286/ ) and quickly got the build bug. I was looking for something to make with the new C-Beam and decided its time to venture into the 3D printer world. I can honestly say I have never been in the same room with a 3D printer, so this is going to be a learning experience. I spent some time browsing the 3D printer builds and finally decided to copy the Talos3D by AlexLee.

Bob's 3D Printer Kit Build

Apr 9, 2014
Category
Cartesian Style Bots
Build Progress
Build Complete!

I have wanted a 3D printer for a while. I had thought to convert my ShapeOko machine to a 3D printer BUT after looking at having to replace the electronics with new and the small form factor. I went looking for a kit which would do what I want. Well I found it. It is the MakerFarm i3v printer.

PrintAir CoreXY

Oct 3, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.

LinearRail - 3D Printer

Jan 10, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

Live D-bot build at MRRF 2017 (Mar 25-26)

Mar 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.

3d nika

Jul 3, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.

Delta 3d Printer

May 27, 2015
Category
Delta Bots
Build Progress
Build in Progress...

I am going to use this as a build log for my delta 3d printer build. I have access to a MakerBOT to print some of the parts. I am still finishing up a few of the design elements but the idea is to have a rigid unit to eliminate deflection in components and maintain accuracy.

MakerSL MSL-6 DLP 3D Printer

Apr 22, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.

CoreXY Cubish

May 31, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

Core-XY Cube

Sep 21, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

Versabot - All metal 3D printer

Sep 30, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.

Adamantine

Dec 13, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.

Talos3D

Dec 10, 2015
Category
Cartesian Style Bots
Build Progress
Build Complete!

In Greek mythology, Talos (/ˈteɪlɒs/;[1] Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.

Vslot Kossel

Apr 15, 2014
Category
Delta Bots
Build Progress
Build Complete!

Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR

C-Beam based modular Resin Printer

Aug 10, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.

Archer - An extendable all metal 3D printer

Jul 15, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.

First 3d build

Dec 16, 2014
Category
Cartesian Style Bots
Build Progress
Build Complete!

I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.

Metal MagBall Carriage

Jan 17, 2016
Category
Delta Bots
Build Progress
Build in Progress...

UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.

3D Printer 320x220x200

Sep 21, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me

Mini D-Bot

Aug 11, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.

V-slot and MDF DeltaBot

Aug 31, 2016
Category
Delta Bots
Build Progress
Build Complete!

This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.

Printer1

May 17, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1

Proteus

Nov 26, 2013
Category
X/Y Table Style Bots

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

H-Bot CoreXY Cube with Fixed Build Plate

Apr 21, 2015
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...

Loading...
Loading Build images...
  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Maker needs.


    [email protected]

  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provides resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop their future.

    Donate to Open Source