Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

Lead 1510

Nov 25, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

Modular Desktop Vacuum Former

Nov 24, 2021
Category
Small Vacuum Former
Build Progress
Build Complete!

This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.

LEAD 710 with High Z mod

Nov 14, 2021
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Overview of a 700mm x 1000mm machine based on the LEAD design and with the High Z mod from the start. Will have a parts list you can use to build yourself if you like the formfactor

Workhorse 3D Printer

Oct 5, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

1500x1000 CNC Router

Aug 10, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives

Corexy laser

Jul 26, 2021
Category
Laser Cutter Builds
Build Progress
Build in Progress...

I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..

45W CO2 Laser Build

Jun 10, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.

(Smaug) 100w 1500x1000mm CNC Laser

May 11, 2021
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.

Homemade CNC Router (Under $400)

Apr 30, 2021
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

So Instead of buying a CNC Router which can cost thousands of dollars I ventured on the quest to design and build my own. I have multiple parts to this series. Hopefully all of my information I share helps!

Phlat Printer 3 meets Open Builds

Apr 27, 2021
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I will go over the attachments for the PP3 Z axis. soon. Before any thing else .You need to know the first PP3 ,used SKP 7 and Mach 3. Later on they used CNC USB.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

ACRO 1010 with custom Z axis

Apr 17, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.

Custom push cart for CNC machines

Mar 13, 2021
Category
Furniture Builds
Build Progress
Build in Progress...

I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.

Indie i2

Mar 10, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

Gantry Style CNC from plywood

Mar 4, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am currently 15 years old, from Germany and trying to build a low budged CNC router. I only designed this CNC based on other CNC routers that I have seen and what I am able of. It consists mostly of 2.3cm plywood to keep costs down. The size of the work area is approx. 40 x 80 cm. I would be really glad if you could give me advice's for improvement on the design and everything else ... ( I could really need your help :) ) enjoy :)

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Gigantesque CNC

Feb 22, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.

crypt-cube

Feb 19, 2021
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.

Sphinx 55

Feb 10, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

Bessy 4x4

Jan 24, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

I found this to be a very fun exercise in building Bessy and will continue to improve her in the future.

Kossel Extreme

Jan 24, 2021
Category
Delta Bots
Build Progress
Build in Progress...

A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.

The dwarf

Jan 20, 2021
Category
Other Style CNC Mills
Build Progress
Build in Progress...

This is a build for those of us that want to work fairly large but are in a tight space and budget

CupriForge

Jan 20, 2021
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This build will use 1/2 inch copper water pipe as the primary material for all structural parts. As of now my intent is a cartesian design drawing from a few popular printers. I'm going to use the least amount of printed parts as possible and locally source as much as I can. I have built an EMT-conduit core-xy printer in the past and while it worked out fine, I feel copper is easier to work, manufactured with more precision, still reasonably inexpensive and will look super cool!

MOVABLE ART TO SCREEN WALL-MOUNTED TV

Jan 17, 2021
Category
Furniture Builds
Build Progress
Build Complete!

This project produced a movable framed canvas to cover a wall-mounted flat-screen TV when not being viewed, which at the touch of of a switch moves down below the TV and sound bar. The same switch is used afterwards to return the artwork up to cover the TV again. Photo shows mechanism without the canvas frame. See other photos.

750x750 Plasma cutter table

Dec 15, 2020
Category
Plasma Cutter Builds
Build Progress
Build in Progress...

It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.

Swing Arm

Dec 10, 2020
Category
Everything Else
Build Progress
Build Complete!

Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way

Improved CBM

Dec 9, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.

AcoustoPlot3D

Nov 17, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Sphinx has all the components I need, except it will need a taller vertical lead screw, the same length as the horizontal ones. It will also need legs. So I need to start with the Sphinx parts list, then make a few changes.

CoreXY Cubish

Nov 16, 2020
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

ACME OX (A Lead Screw Driven Ox Derivative (850x1500))

Nov 2, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.

Mighty Chihuahua

Oct 26, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360

Router Sled V1.1 V-SLOT

Oct 26, 2020
Category
Everything Else
Build Progress
Build Complete!

We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)

3D Printer 051

Sep 30, 2020
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Functional real-world 3D printer build with RM2-2RS bearings in routed V grooves on phenolic resin rails (lab countertop scraps) and NSK 25mm linear rails/trucks.

Horizontal CNC V-Beem v1

Sep 16, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.

LayerFused X301 - CoreXY Large Volume Printer

Aug 25, 2020
Category
H-Bot and Core XY
Build Progress
Build Complete!

The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.

Beefed up Minimill

Aug 24, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice