Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Everyone, I need some help with the above Error. I have tried several times to cut. I keep getting the same message below. [ATTACH] I...
Good Morning Peter, You are exactly right. I just tested the machine by removing the 24v PSU for the relay. You are correct, I placed the 24v...
I have included the image of the startup of the controller. Also, I have included the Gcode file that I used last week that cut perfectly but now...
Hi Folks, My Black Box controller is not responding to any GCode Commands? I create the GCode in VCarve Desktop. I have a check that the USB is...
Hi Peter, I received the magnets today. They fit pretty well? I now have a new issue. The probe wizard works fine until it starts to probe the...
Hi Peter, Thanks for the input. I measured and came up with 6mm. I found some magnets with 6mm x 1mm on Amazon. The order should be here...
Good Evening Everyone, I have the XYZ probe. The magnet has come out of the probe. Of course, I cannot find the magnet. Does anyone know the...
Rob, Thank you for the in-depth explanation. I really want to know home the machine reacting to the Grbl code. I am going to re-read your...
Hi Peter, Thank you for the explanation. I have the probe and will re-probe for each tool change. I will definitely give this a try tonight. Wayne
Hi Folks, I am new to CNC. I have looked through the thread and understand basically how Black Box Controller is presently handing tool changes...
Hi Peter, I am back. I have checked the mechanical. I am still getting a lag on Y-axis. I have rewired 4 times on Y-axis and the issue still...
Hi Peter -- Thank you for your input. I will check the mechanical of the extreme v-wheels.
Peter Van Der Walt, post: 99690, member: 69967"]Good, yes, for the leadscrew driven machines the color codes are the same order on both outputs....
It is a screw drive
The machine is a Leadscrew. It appears they move in different directions most of the time. I will rewire the motors again and get back to you...
I am a newbie to building CNC machines. I decided to make a Workbee 1010 with the Blackbox controller. Order the Blackbox about a week ago. The...
14 LB 3 OZ