Separate names with a comma.
Some features disabled for guests. Register Today.
First project made. A collett holder for my ER20 colletts. It cuts good when I got the feed and cutting dept right. It did not like heavy cuts,...
Mounted and wired the home switches, so now the build is complete for now. Surprisingly easy to connect them in Linuxcnc, or have I just gotten...
Just started building my cnc router. It is a 750x1000 mm size. Going to use the basic parts from Makersupplies for the Ox Stainless, but instead...
Short video of first run. Now I have to explore feeds and speeds. [MEDIA]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Now I am actually almost done. Mounted...
Some more progress, mounted the spindle mount today. Had to make my own version of t-nuts, took some 10x2 mm brass flat bar, cut to length,...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Slow progress on this one, been a while since last update. Started mounting ballscrews now, gantry is almost...
Here is a short video of the turning of the spacers. [MEDIA]
Here are the attachment finished, just need some other bolts, the short ones are too long, and the long ones are too short, so this is just to see...
Made spacers for the ball-screw mount to gantry. 47.5 mm long, 18 mm diameter. Next is a mounting plate. Made them quite big since they are going...
Starting to testfit the ballscrews, need to make brackets for the ends, and spacers and mounting bracket for the gantry nut. [ATTACH]
Got some ballscrews in the mail today, so now I can start to make brackets for attaching them. Started with the spindle mounting plate. Had to...
Holder til i Lier utenfor Drammen. :)
Yeah, it's a well enclosed box, so I have to have some sort of ventilation. I'm going to mount it on the side of the table, so I figure a fan on...
Wiring of the drivers ready. Now it is just sensors and power supply in to the box remaining, then the control cabinet is done. [ATTACH]
Got a cabinet for the electronics sourced, an old enclosure for some ventilation systems that was obsolete. Right size and sturdy cabinet. Startet...
Thay are made of 3 mm stainless.
Got a little done today, tapped the ends of the main rails and mounted the subframe. Had to take i apart after first assembly due to fixing the...
The table was done today. Used 15 mm plywood instead of 22, due to incredible price of the thicker one. I think 15 mm will do. Also made a shelf...
LarsTveito published a new build: Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for...