Separate names with a comma.
Some features disabled for guests. Register Today.
Did this ever get done? I use sketchucam for my plasma i love it but i have to use laser mode so there is no pause after torch fires so i have to...
Hi guys i was wnondering if it is possible to make X0 Y0 in the middle of the drawing? This would be handy when trying to cut in a certain spot in...
Ha i acually used the laser mode and it does turn on and off but no z movment i just can't seem to win here lol is there a way to get z movment?...
Hi i am trying to use this for plasma also but when i generate code it has no s code for spindle on and off that i plan to use for torch on off...
I know this is kind of an old thread but i was wondering if there is a way to set leadins and leadouts i have a cnc plasma and am trying to use...
Thanks for responding i figured it out i was using imperial feed rates in my cut file and when i input commands but grbl is reading it as metric...
Ok so i think i have got all this figured out now as long as i set spindle speed to max it should make the relay go, and Dave i think you are...
Ok so i tryed the G1 code and i did get it to move faster i guess i was thinking inches per min instead of mm because the number increases have to...
Thanks for the responses. Sonny my problem is it won't move fast enough if i change the feed rate to jog in ugs the speed does not change if i run...
Hey guys i just started using grbl 1.1 for a plasma cutter my problem is my feed speeds are slow and i can't seem to change them if i change steps...
So i got my new drivers and i hooked up the y axis it still moves the right distance but it is really slow i have tryed to change the feed rates...
Hey open builds people just wondering if anyone is running an arduino cnc plasma table i have built a 4x4 table and was wondering about grbl...
Anyone use arduino for plasma? Any tips on setting grbl up for torch control etc?
Thanks for all the input guys once again my *** has been saved i will get some better drivers. Should i still use the shield or just the arduino...
I was wondering if this might be the problem thanks for the response i guess i will have look into some different drivers
[ATTACH] [ATTACH] [ATTACH] [ATTACH]ok so here are some pics sorry about the screen pic of grbl settings i could not copy and paste anyway i think...
So today i thought i would try the driver current i adjusted them according to the pololu video on they're site still not working. The only other...
I should also note that i am running a chain drive and one full rev moves the gantry 140mm so i calculated and measured and came up with 2.856...
Ok sorry. So i have an arduino uno with v3 shield running 36v polulu drivers they are 85.... I don't remember the rest of the numbers and 425oz...
I need some help I'm kind of stumped. I got my electronics all hooked up and working that was great seeing my plasma table move for the first...