Separate names with a comma.
Some features disabled for guests. Register Today.
Okay. I went back and re-read the grbl statement. I think it makes more sense now. I'll definitely use a vom to check voltages before I hook up...
I went back and re-read the documentation. According to that, I have to know what voltage will operate the spindle at 20k or 18k or whatever, and...
Realizing this is an older post, I would like to try and get clarification on the voltage output on the blackbox. I have a VFD and spindle on...
i ended up completely disconnecting power between the interface and controller for a few minutes. mine was upgraded using the pc as i was having...
that's the way i was originally leaning in terms of the size of spindle, but 120v vfds seem harder to find, so just wanted to check. i'll...
Just curious, would a 10 lb 2.2kw be too heavy for my machine? I'm thinking of going with the 220v vfd instead of the 120v because I found a 220v...
yeah, open source is a cool thing sometimes! sometimes can be frustrating, but that's all part of the learning. well i do hope you have success....
Sounds like fun. I'll be interested to see how it turns out. I started out with a XPROv3 controller, and quickly found the driver chips to be...
Brushes fixed the problem! Thank you guys! Still going to proceed with the 1.5kw spindle, but at least now maybe I can make the purchase when I...
Guess I replied back to my own message instead of yours. Found the problem. Looks like the retainer for the copper braid going into the brush...
Well, I suddenly remembered where I put my hook tools. I think I found my problem. This happened when I released the spring holding the brush in...
Pics of brushes and stator. Not sure how much is left. I gotta go get a hook tool to pull the spring. Thought o had one but can't find it
Will do! I'm hoping that the local DeWalt service center in OKC has some replacement parts, or i'll have to order them and wait a week. Still...
Pics of the x axis joints. Really the only difference between my build and the lead 1010 that I can really see is I used c beam for the x axis...
Also I will say that on the upcut end mill on the roughing I do get s little chatter but it doesn't seem to cause any vibrations in the carrage. I...
The carrage seems solid. I have the router mount attached to the c beam and the c beam attached to the v wheel plate. I can send pics in a couple...
Forgot to address the speed. Most of the carving is finish pass so running at about a 2 on the wheel. The roughing pass is only about 9 or 10...
Well as far as hours go I really have no idea exactly but I've made about 9 carvings between the 2 routers and the carving gs are around the 10 to...
So since, mid January, I have 1 Bosch Colt router that sounds like bearings are shot and probably brushes, too. I have a Dewalt that has either...
makes sense. my fix will be trying one step back on the debian since, as you correctly stated, it appeared once people upgraded to bullseye....