Separate names with a comma.
Some features disabled for guests. Register Today.
[ATTACH] While milling a test piece for my flight simulator cockpit I noticed some space in my bed. This was caused by the selftappers with which...
5. Electronics. [ATTACH] I created the frontpanel for the buttons with the CNC Plus machine, filled the lettering with their appropriate colors...
3. Raising the bed. [ATTACH] To raise the bed I had to use longer bolts for the wheels. This caused the wheels to "spread" a little with as result...
5. Electronics. [ATTACH] I had to move the aluminum profile which activate both limit switches on the Z-axis. I had to move them to the back of...
3. Raising the Z-axis / 4. Spindle mount. [ATTACH] After dismounting both the Z- and the X-axis I lowered the original gantry plate so the bottom...
5. Limit switches. [ATTACH] I used the default Open Builds limit switch sets (6 in total). You have to be carefull how to mount these switches to...
2. Center the bed. [ATTACH] I noticed that the center of the board was not in the center of the Y-axis range. This was solved by moving the front...
1. Larger bed. [ATTACH] First I added aluminum profiles (15x15x2mm) between the gantry plate and the wheels (with longer screws). The spacers are...
If it would be another straight out of the box build, I wouldn't have started this thread, but durig the build I found out that I wanted / needed...
Thair.nl published a new build: C-Beam Plate Maker with a larger size of the work area and electronics added. Read more about this build...
Thanks Rick, this is indeed another way of solving the limiting problem. I will "mill" this over to see what the size of these filler rods needs...
I am in the process of ordering a C-Beam Plate Maker bundle with everything that is needed to get it up and running. Default the Plate Maker has a...