Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks Peter! You're right. It is time to do some study.
Hi Peter, managed to shave off an hour of milling time with the adjustments you suggested: I did a trial run with a piece of soft lumber using a...
Hi Peter, with everything that's been going on around CNC'ing these last couple of days, this is going to be an Epistle: First of all,...
Hi Peter, thank you for your confidence in my abilities to "...pull the files into a CAD application first, and do a little cleanup" and follow...
Hi Folks, I have been trying to copy the DXF file on the making of OX plates from Mark Carew's "Files and Drawings" listed in his OX Build; when I...
Hi Folks, I followed up on the wire-check to eliminate any problems there toward "no support Firmware" problems-- everything checked out fine. So...
Hi again, Peter. I checked the link you sent, and it is exactly the message I get when trying to Connect! I will go over it with a "Fine Tooth...
Thanks Peter! I will give the wiring a good going over in the morning.
Hi Folks, I have been working with the New Openbuilds Control Box for a few months now, and everything was working fine until lately; I keep...
How do I mirror a Text on OpenBuilds CAM - GCODE Generator?
Hi Folks, after much trial and error, and some very good Tutorials on Hello World cut, I finally managed to route my own. Having trouble...
I thought I would try again with the Errors and Alarm pictures that come up when I attempt to Run the Hello Logo: the last batch of pictures...
Hi Folks, I reach a Plateau with each new movement on my machine: today I actually got to "Run A Job", the Openbuilds Hello Logo. Unfortunately,...
Hi Giarc, I have 3GT belts with 20 tooth timing pulley: I adjusted the Micro steps as you suggested, and settled on 27mm-- I now have 1, 10, and...
Hi Giarc, my $100, $101, $102, are set at 250.000 steps per the default settings for a openbuilds C- Beam Machine; though my build is an Ox 1m Y...
I have attempted the "Fine Tuning" of the Y and X axis set at 10mm increments, using the Calibration Wizard, wizard tools; as I go through the...
Well here's a bit of a conundrum-- I think: when I engage the incremental jog's movement, be it 1, 10, or 100 mm, the 1mm moves 10mm, the 10mm...
Hi Peter, I was unable to rectify the WebGL Support problem with the existing computer, so I switched over to another that I have-- and Bingo!...
Hi Folks, I have reached the amazing point of homing my Machine using the Blackbox download, however, the Control is unable to show the 3D part of...
Hi Rick, two heads are better than one-- yours and Peter's: I am having trouble downloading the 3D viewer; I am using a Windows 7 system if that...