Separate names with a comma.
Some features disabled for guests. Register Today.
I made this Chair that was on Thingiverse for my daughters AG doll. Not my design. I scaled it up some but probably should have left it alone....
Anytime. Just reach out if get into a snag or need some more help
The company that built the machine or controls is still in business. You may want to convert this to opensource hardware, but a call out to them...
When you get a minute or feel like getting back to it, can you post a video of the hole running or an image.
I am using a tinyg so it will not help you.I have a CNC machinist background and have built a couple of 3D printers so I was just helping out.
I understand. Reach out if you need anything. I have a 1000 X 1500 I built. I am almost done dialing in the calibration.
What else are you having an issue with? still not cutting the 2 inch diameter?
so you are good now?
it appears to me that your issue is not your machine, it may be the software. one way to test is to use some other software. I use fusion 360. you...
is the software set up in inches or mm? is the machine set up in the same units? If you are programming in inches and the machine is thinking it...
Never used this app, so I don't know what it allows and does not? so it does not let you post. What size tool do you have selected? What side of...
Can you post the test file you tried?
OK. Z should be good now. have to validate the gcode if the machine moves the amount that you request with no issues.
What cad/cam software are you using. If you are getting the Y or X access on movement, then it is a program issue. Can you post the program you...
You should have 200 for the Z steps/mm. This is pulled off the openbuilds site. NOTE: With 4 starts the pitch will be 8. So 8 is what you would...
for Z what lead screw do you have? The way I calibrate Z is to measure a 20MM aluminum extrusion. Set Z to 0 when touching the bed, then command a...
Calculated that is right, but if you are not milling a 2" circle either the gcode is wrong or the steps are wrong. Move the machine in one...
your setting for $100-103 sets your steps/mm. According to your image, you have 26.667mm/step. What tooth count is no your X and Y pulley? What...
GRBL uses that for soft limits as well but it will not let homing go beyond 1.5X's of that distance. That is what I understand. If you turn on...
GRBL says the following for these settings. GRBL will give up searching for a limit switch after 1.5x the max travel distance. The max travel...