Separate names with a comma.
Some features disabled for guests. Register Today.
Hi, actually I’m pretty happy with this setup. I run Smoothieware since I’m performimg only cutting and no “photo engraving”. I would go for...
Hey Jorge. This is the part I've been struggling with a little bit as well. As written somewhere above I don't have and won't any schematics. At...
Hi Darren, you're completely right, I must have missed them during initial upload. Anyway that should be fixed now. For drag chain attachment...
EDIT 28/07/18 : Changed the machine state from build in progress to complete!!:) This is great and sad news.. Great because I have fully...
Thanks! As I have written in describtion and earlier in the discussion, no BOM exists and I don’t plan to put it together. V-slot lengths can be...
If you do some research you will find out that there are several types v-slot, t-slot, some kind of EU type and many many more. They come in...
For all the wiring I have used different diameter of soft silicone wires. For motors it was I suppose 22AWG and for logic control 28AWG, for wires...
I tried to take photos of key elements during the build time. Now when the build is finished it would be difficult and for some parts even...
If you open up the SketchUp file and locate the extrusions where the linear rails are attached you will get the dimenssion. Actually I have...
Well this is a question I have never wanted to ask myself;) I made some mistakes, some of the materials such as connectors, wires, screws etc. you...
Many thanks:) Today I have made some "serious" cutting of 5mm PVC and I must say I'm more than happy. Very nice, straight and clean cut with...
Finally got home so I can upload some more stuff that may help you in your research. When you search for cheap high voltage PSU you most likely...
I have wired the electronics “on the go” so I don’t have any schematics. Anyway I can try to show you the direction. The controller itself is MKS...
This photo is actually from 3D delta printer I have at home as the laser cutter is located in my “dirty” workshop. Nevertheless it shows nicely...
Thanks:-) You are correct, those linear rails are fixed directly to v-slot extrusion. Those are MGN12 linear rails fitted with MGN12H sliding...
On my actual setup it is 590x400mm and 140mm on Z axis travel. You would be able to add aprox. 25 mm on X and Y axis if you leave out max...
LukasK published a new build: I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From...
13lbs, 5oz
@Jonathon Duerig I have messed two thing together, I have meant two double-wide gantries in the same layout as on the photo where xlarge were...
@Jonathon Duerig thanks for ideas! I assumed that from the "inside" of the connection you have double L bracket similary to the outside, no need...