Separate names with a comma.
Some features disabled for guests. Register Today.
OK... thanks for your contributions!
Hi Devs... any chance in adding a confirm RUN popup? Run is so close to the OPEN dropdown... just after loading gcode... my mouse moved and BAM!!!...
**** Peter... you are fast. I edited my post but it was too late. Thanks for the help :)
Jim - I have the Huanyang HY01D511B VFD and 1.5kW spindle. I will look at using the VFD features to trigger the IOT power strip. Peter - Just...
Hi all - I upgraded my Dewalt 611 to a 1.5kW VFD spindle. Before the mod I used the IOT relay to power the router and flood pump from BlackBox's...
Thanks for the reply... I was able to connect and get a snapshot. But this doesn't appear to allow me to debug with watchpoints, examine...
Hi All - I've been exploring changes to the OpenBuilds CONTROL software using VS Code. I am successful in making changes to probing function and...
I'd reach out to Drew [email protected] :)
Hi All... I am so impressed with the #Drewtronics touch probe and the #OpenBuilds Control hardware and software that I needed to share. Getting...
I cut 6mm Aluminum sheet with my C-Beam Router to make plates for my CB3030. 1/8" (.1250") single flute carbide endmills for plastic -...
Going to test without... but if I get weird triggers/steps... shielding 4 me :)
Good to know. I'm using Xtension limit switches. Might try both :) Thanks!
Yeah... what I suspected. I'm designing an enclosure. Adding cable mgmt should be easy?
Has anyone had issues with the Dewalt power lead running parallel with stepper and endstop wiring? Interested before I rip into this. Thanks - Brad
UltiBots published a new build: The D300 V-Slot 3D Printer Kit is BIG with a 300mm heatbed and 445mm max Z! Its all metal frame is RIGID using...
We ordered 0.25" plates from OnlineMetals. They are within their 0.015" tolerance = 6.58mm. We hope to have a set of plates on our webstore soon....
Paul - I too found my leadscrews had considerable play in the bearing. This has contributed to vibration noise. I am considering using PTFE tape...
@C-Line - please refer to the source files on our GitHub and the image below. The eccentrics go in the 7.2mm holes. Essentially the upper 2 wheels...
@C-Line - I have uploaded the latest files to our GitHub. We plan to sell pre-production plates for $80. The raw materials are ≈ $40, setup time ≈...
These we used for less than a week on a demo unit. Most are like new. One or two may have marks left when screws were removed. Priced > half off...