Separate names with a comma.
Some features disabled for guests. Register Today.
X-Clacks-Overhead: GNU Terry Pratchett
Chris I'm intending to use 4 pin LED lights and any help would be appreciated.
I know that the overall weight of the Torenado (including the E3D, fans and NEMA14 motor) is 13-14oz, my mounting plate (including all the wheels...
When I tried to actually mount the Toranado I found that the mounting holes were slightly misaligned. So I have updated the STL to more accurately...
My mount does work with the No ZProbe option of Carriage Generator: Hot End Mount Generator - Customizable for various carriages, hot ends and...
I've just printed a test piece to show the mounting holes and the bridging layer in the M5 holes.[ATTACH]
You can just print the build plate without support in the orientation shown. There is a 0.2mm layer at the boundary between the different...
As some other 2020 mounting plates for The Toranado Precision Geared 1.75mm Extruder (The Toranado Precision Geared 1.75mm Extruder - v1.1 by...
It's a lot easier with S3D. The auto config will always give you multiples of each other, based on the nozzle diameter. It does the same thing on...
I've just tried using different layer heights on my DaVinci Duo 2.0a. I used 'Auto-configure for Print Quality' settings of 'High' (0.1mm) and...
Yes, each process has total control over all parameters
@wackocrash5150 One of the things I like about S3D is the fact that you can use multiple process settings. For example if you wanted to change the...
Like you I wanted the option of auto levelling an I've opted to use the BLTouch. While I haven't actually finished my C-Bot variant I have tested...
That's what I thought, especially as I don't have a big workshop.
Here's a little something I knocked up for those of us without all the workshop tools. It's a little drill guide for drilling the mounting hole in...
@Steve Jeppesen I appreciate the offer of assistance. I'm sure I will have questions as I go along, but for the moment I'm just gathering...
@Keith Davis I have a couple of questions, why the different mix of stepper drivers? Would it matter if I used all DRV8825, of course the jumpers...
@Keith Davis, I will probably be using the motors from the Prusa which are all 200 step motors. I'm initially contemplating a single geared...
I've finally decided, I'm going to build an i300. I have been looking for a good design and yours' is a simple as it gets. My current Prusa i3 is...
@Keith Davis I've had a look at the Assembly Instruction pages and for what it's worth I think they are very comprehensive with the exception of...
